Current location - Trademark Inquiry Complete Network - Trademark registration - How to adjust the rearview mirror is the best solution of subject two.
How to adjust the rearview mirror is the best solution of subject two.
How to adjust the rearview mirror in subject 2? The most important thing is that you can clearly see the position and angle of the car body (wheel) and the library line from the rearview mirror, and adjust the car body in time. Complete the operation according to the project requirements.

First, you must adjust the car seat before adjusting the rearview mirror. Adjust the seat back and forth, and quickly press the clutch with one foot. Knees should not be too straight, but should be curved. Arms stretched out at the upper edge of the steering wheel. Third, when you hold hands at nine o'clock, you can bend slightly.

Second, the rearview mirror is divided into left rearview mirror "L" and right rearview mirror and middle rearview mirror "R".

(1) Adjust the left rearview mirror, press the down arrow, first press the button to the lowest position, and you can see the left rear tire and the touch point in the rearview mirror. The front door handle is located above and below the rearview mirror 1/2. Press the left arrow until the body occupies the left and right 1/3 position of the rearview mirror. (2) In Subject 2, the adjustment method of the right rearview mirror is the same as that of the left rearview mirror. (3) The center rearview mirror should be able to completely see the four corners of the rear window.

Third, fasten the seat belt after adjusting the seat and rearview mirror.

Such as reverse storage and right storage.

① Observe when the lower edge of the left rearview mirror coincides with the starting line. Quickly fill the direction to the right.

② Look at the right rearview mirror. The included angle between the car body and the garage is about 30cm. The steering wheel stopped moving, so I backed up. The distance between the car body and the corner of the garage can be controlled by appropriately adjusting the steering wheel left and right. In the rearview mirror, you can clearly see the change of the distance between the wheel and the corner of the garage, which is convenient for adjusting the car body in time.

③ After the car body is put into storage, control the car body to keep a distance of about 30cm from the two side lines. Adjust the steering wheel when reversing until the car body is parallel to the garage sideline, and then adjust the steering wheel.

④ Stop when the lower edge of the left rearview mirror coincides with the corner line of the garage.

Subject 2 Adjusting the rearview mirror is the beginning of completing five basic projects. You must learn to finish five exercises more smoothly. When practicing, you can get off the bus to see the difference between the distance seen in the rearview mirror and the distance seen when you get off the bus. According to the difference of personal height, we should find the right time to hit the direction. During the operation of the project, control the speed and keep driving slowly and at a constant speed, so that when you see the rapid line pressing in the rearview mirror, you can quickly adjust the direction.