1. Smelling style Yunnan tobacco flavor is very weak, showing the original flavor of tobacco, while the flavor of tobacco flavor in Shanghai, Qingdao and Tianjin is relatively strong.

2. Glossy: famous tobacco and cut tobacco are generally glossy and oily, while fake cigarettes have poor luster.

3. Aroma: Famous cigarettes are thicker, while fake cigarettes are worse.

4. Famous cigarettes have little irritating odor and clean and comfortable aftertaste.

cut tobacco

1. Expanded cut tobacco

Generally, there are expanded cut tobacco in Shanghai, Guangzhou, Yuxi and Beijing Tobacco at home and abroad, and the expanded cut tobacco can be separated by acetone.

2. Expanded cut stems

Yunnan famous tobacco cut stems have been expanded, and the treatment effect is good, and the cut stems are very thin, which is one of the important characteristics of Yunnan tobacco.

Features (compared with the unexpanded cut stem):

(1) The oily luster is slightly better;

(2) the texture is soft and loose;

(3) the color is light or whitish;

(4) The species is large and thin.

3. Dyed cut tobacco (generally fake cigarettes)

Features:

(1) The color is unnatural;

(2) The corners of the cut stems are red or yellow (different from the natural color).

4. Scraps of cut tobacco

Fake cigarette producers use scraps to make authentic cigarettes.

Features:

(1) It often contains scraps of paper, waste tow and other sundries;

(2) It often contains expanded stems and so on.

5. Tobacco flakes

Many famous cigarettes abroad use tobacco flakes, such as Marlboro; At present, domestic famous cigarettes rarely use thin sheets.

Cigarette

Contents:

(1) Filter tip

1. Material: The famous cigarette does not use polypropylene tow, but uses acetic acid tow, which is easy to break and will not spread when peeled off; Polypropylene is easy to break, and it will disperse when peeled off.

2. The total length of long cigarette filter is 84mm- 2mm (25mm also), 1mm-25mm and 81mm-15mm. Exceptionally, the general's mouth is 22mm, and 1, yuan is 5mm.

3. Light filter

Composite filter: mild seven, Zhongnanhai, Gaole cigarettes;

hollow filter: parliaments;

Laser punching: Marlboro (Polish version of Marlboro doesn't punch holes), Zhongnanhai, Kent, Light Hilton, Qixing, etc. All kinds of cigarettes in Yuxi Factory use electrostatic punching.

4. tipping paper printed

printed patterns and printed cigarette names.

(2) cigarettes

1. The ribbed paper with cigarette paper texture is exposed. Embossed paper for counterfeit cigarettes has a large contrast and poor open field (open field: tobacco can be seen).

2. cigarette butt joint requirements: flat, straight and even, generally not sticking to the edge.

Generally, the tipping paper direction of a cigarette is the same as the cigarette direction, and the adjacent two cigarettes in a box may be different.

3. assembly: the assembly of tipping paper and cigarette should be smooth and even, and there should be no air leakage or wrinkling.

packaging

contents:

(1) transparent paper packaging

1. The friction coefficient of texture is low, which is .38, which is basically consistent with the strip

2. The sealing position of the same strip of cigarettes, the cigarette packets are arranged in the same direction, which is highly reproducible and the manual packaging position is inconsistent.

3. Pull wire

(1) Shape of pull wire head

Square: FoCKE machine, hard box cigarettes from Beijing, Shanghai and Kunming factories;

semicircle: sASIB6 packaging machine, Kangjisi packaging machine;

oval (horseshoe): GDX1, GDX2, GDX2 packaging machines.

Key points for checking the cable head:

A: Whether the shapes are consistent;

B: whether it is regularly symmetrical (that is, the circle should be round, the square should be square, and the ellipse is elliptical);

C: the position and size of the drawing head in the same cigarette should be consistent.

(2) Pull-line printing

The strokes are clear and complete, and the size and spacing of words are even, and the size should be consistent with the original, while paying attention to the meaning of words.

(2) seal (mouth flower)

1. printing

(1) color: it should be basically the same, and it is more common to be light or dark.

(2) font: the real cigarette is clear, but the fake cigarette is unclear. For example, the word "Xi" in "Yuxi Cigarette Factory" is unclear because of its many strokes.

2. The glue traces on the back should be two parallel straight lines with a width of 2mm.

3. By comparing and checking the sealing positions of each cigarette packet in the same cigarette, the real cigarettes are basically the same.

4. Inspection of the seal

(1) There are traces of overlapping sealing;

(2) there is damage.

(3) cigarette label (cigarette trademark identification)

1. Specification

GDX1: 155mm * 1.8mm or 154mm * 1.5mm

SASIB6: 159mm * 1.5

Features of cigarette labels of various models:

(p)

(2)SASIB6 is glued and sealed on the back with a 3 angle cut, and there are needle holes after packaging.

3

2. Printing

(1) Color and location of hot stamping

Hongtashan: mountain, factory name and brand name;

red plums: plum piles, stamens, etc.

Ashima: Portrait, etc.

Stone Forest: patterned border;

Special Gallery: Side warning sentence;

Tehong River: small square edge;

peony: flowers, leaves and brand names;

double happiness: word margin.

note: the real smoke is shiny and the fake smoke is dull.

(2) there is no luster at the place where the glue is stuck.

(3) font

warning statement, the "health" and "quantity" of fake cigarettes are unclear.

3. Anti-counterfeiting marks

(1) Cigarettes using anti-counterfeiting technology, cigarette labels or transparent paper should have anti-counterfeiting marks that meet the requirements;

(2) Anti-counterfeiting marks cannot be used as the basis for judging whether cigarettes are true or false.

4. Adhesive sealing

(1) Adhesive

White cross adhesive sealing is generally used.

(2) Adhesion marks

GDX2: Five-point arrangement is in a strip shape. There is a glue mark behind the tongue paper.

FOCKE machine: the small box is sealed with three parallel glue lines, with two glue marks after the tongue is red.

GDX1: the side is glued and sealed in a three-section glue line, and the upper one is slightly shorter; Generally speaking, the sizing agent is not applied to the edge of the ejector package, but there is room (slightly preventing the edge from warping).

combas: four-section glue line is glued on the side.

BE: two-stage glue mark, one is shorter and the other is longer.

GDX2: two-stage dot matrix glue mark.

model p>6: one-stage glue mark, not to the edge, and on the back.

5. Old cigarette labels

Fake cigarettes such as Zhonghua, Hongtashan and Ashima and use old cigarette labels.

Attention during appraisal:

(1) Pay attention to crease and wear of the flip cover;

(2) Crease at the adhesive seal of transparent paper;

(3) Pay attention to the bottom and mouth of the soft package for signs of folding or twice gluing.

(4) lining paper (aluminum foil paper)

1. There are two kinds of aluminum foil paper currently used:

electrostatic aluminum-plated paper: the gloss is a little worse, it is not too straight, and it is more oxidized;

aluminum foil paper: with good luster, straightness and less oxidation.

there are many composite aluminum foil papers used in famous cigarettes.

2. Printing

Pay attention to font, pattern, English factory name, Chinese factory name, etc. The printing is made by the packaging machine (hard flip cigarette).

3. Pull-up mouth

Flip-up cigarette: The pull-up mouth should be opened with a little force, the Lamian Noodles is straight, and the pulled-down part is rectangular.

fake cigarette: a: it can be pulled out without force;

B: it takes a lot of force to break, and the pull mouth is seriously damaged;

C: the pull mouth is not rectangular.

4. Dimensions and specifications

The width of p>GDX1, GDX2 and SASIB6 transverse packages is 114mm. FOCKE straight package width is 9mm.

Features of different models:

GDX2: aluminum foil paper is wrapped horizontally by 114mm*155(154)mm, with a pull-up of 77mm or 77.5mm, which is sealed with cigarette cases in a five-point shape, with a glue line in front and behind;

FOCKE machine: straight package, with two parallel glue lines between aluminum foil paper and cigarette case, both in front and back, and one on each side in figure-eight.

5. Folding method of aluminum paper at both ends:

SASIB6: The folding method of upper and lower ends is the same.

note: generally speaking, the strip package is the same as the small package packaging machine.