Which brand of model nozzle pliers is the best
The best one is undoubtedly GOD HAND
The second is Tamiya 74035 gold medal scissors
Which brand of water nozzle pliers is the best
What do you mean? Model?
What brand of nozzle pliers is good? Where can I buy authentic ones?
Tamiya gold medal scissors, Taobao
About Gunpla nozzle pliers
It depends on LZ’s hobbies.
Rich people can buy a water mouth pliers called the Hand of the Ultimate God
I have never bought one, but I heard from people who have bought it that it is very useful, but it is expensive. 30
Legend has it that the hand of God leaves no trace after cutting, and there is no need for a penknife. However, the credibility is relatively low
Ordinary enthusiasts can buy Tamiya's gold medal water nozzle pliers. I bought one. It is relatively small, very sharp and easy to use. Mainly used as a vice.
If you don’t care, just buy a domestic water mouth pliers. My main clamp is made in China.
As mentioned above, no matter how good the nozzle pliers are, they need to be polished slowly with a pen knife + water sandpaper. The luxury of the Hand of God is not very meaningful.
I suggest LZ buy an ordinary off-brand nozzle pliers, and if possible, use Tamiya's gold medal nozzle pliers as a secondary pliers. Anyway, you have to use a pen knife to trim it down.
Which water-mouth pliers are better for making Gundam, God's Hand or Tamiya's Gold Medal?
God's Hand, remember that God's Hand is a single blade, with a left hand and a There are right-hand versions, and the signal is spn-120. There are version A and version B. Version B is a repaired version, and the price is between 200-300. The price of version A is between 350-450
What brand of Gunpla tools are good? Don’t use pliers that are too expensive!
For the cutting pliers, it is recommended to buy Tamiya 74035 gold medal scissors. Although the price is very expensive, it is definitely worth every penny and you get what you pay for. Otherwise, just buy domestically produced pliers that cost more than ten yuan a pair. There is no essential difference in the effect between pliers priced at 50 or 60 yuan and pliers priced at 10 or 20 yuan. They both "squeeze" the water outlet, while the gold medal scissors truly "cut" and cut the water outlet.
For the pen knife, you can buy a Joyoung pen knife, which costs about ten yuan, and then buy a box of Tamiya's 74020 blades, which costs about 20 yuan.
For the tweezers, buy a domestic one. Seiko tweezers will do.
If the sandpaper is less than 1,500 mesh, just buy domestic or ordinary water-based sandpaper. For sandpaper above 2,000 mesh, you must use Tamiya, because ordinary water-based sandpaper may have larger particles, so in high-mesh sandpaper There will be obvious scratches when sanding, but Tamiya's water sandpaper is very uniform, of course, it is also very expensive.
Most of the other tools are domestically produced. If the demand is average, buy Usuda. Although the tools for experts in Japan are better, the prices are really not close to the people.
If you still have any questions, you can ask...
What brand of needle nose pliers is durable?
Hello, I majored in electrician. After four years of study and internship experience, I think the quality of Lao A’s electrician tools is very good. They all say that tools are most likely to be damaged during internships, but the old A tools are very durable and the prices are easy to accept. You can go to Ming'anpu Mall to have a look. The products they sell in the mall are still very comprehensive.
Is it necessary to buy - Tamiya TAMIYA model special gold medal scissors / oblique nose pliers [74035] this?
There is a big difference between Tamiya gold pliers and dozens of pieces of pliers. I have used both. The feel and cutting accuracy of the two are very different. You only need to use both. Experience
If conditions allow, it is recommended to buy gold medal scissors, you will not regret it
Another thing to note is that even if you use gold medal scissors, if you want to completely remove the water outlet, It still needs to be treated with sandpaper
What is the difference between the Desoutter water-nozzle pliers PL-725 and the diagonal pliers?
Model/Specification PL-725 Brand/Trademark Continental The real difference lies in their use. Diagonal nose pliers are generally used to cut some harder materials. The nozzle pliers are mainly used to cut some soft wires and plastics.
There is a big difference in the cutting capabilities of the two cutting edges. Continental diagonal pliers MN-A05/125mm. Continental water-nozzle pliers PL-725/125mm, PL-726/150mm. Continental long-nose pliers M-615/125mm, M- 616/150mm Continental Electrician's Needle Nose Pliers T-316S/150mm, T-346S/150mm Continental Electrician's Diagonal Pliers N-205S/125mm, N-206S/150mm Continental Electrician's Flat Nose Pliers P-106/150mm, P- 107/175mm, P-108/200mm
I just got into tank model tools, and I am currently planning to buy these equipment. Let’s see if these things are enough. Begging for a master! QQ 1067617863
Nozzle pliers (TTC nozzle pliers FC-120): It is recommended to use Sanshan sp23, which is a very cost-effective scissors. If it is better, you can use Tamiya gold medal scissors
Straight tweezers ( Usuda UA-200): Most of Usuda's products are very cost-effective
Curved tweezers (Usuda UA-200E): For tweezers, buy anti-static tweezers directly. End
Files (Tamiya 74046 set of three): Tamiya files are good
Pen sharpener (Jiu Yang 308) + (Jiu Yang large-angle blade with 308): Pen sharpener recommendation Olfa and Tamiya's pen knives are all produced by Olfa. The pen knives and blades are very cost-effective
Sanding rod (2 yuan each from other brands): no problem, buy it as needed, this thing is used There are not many, mainly sandpaper
Water sandpaper (Eagle sandpaper set): It is not recommended to use Eagle brand, the cheaper one can be sharp, the more cost-effective one is Warrior, the Eagle brand mesh has moisture
Glue (Tamiya 87113): The smell is small, but the toxicity is still there. The orange cover has a mediocre sliding seam effect. It is recommended to buy a slip seam glue. Gunshi mc129 and 502 are also commonly used glues, which are better than Tamiya Gunshi's. If it is commonly used, it is recommended to buy Antegu, the effect is better
Water sticker softener (Gunshi MS 232) is no problem
Drilling hand drill (Usuda UA-800A ): Usuda's knockoffs... they really don't have any advantages except for the price. Tamiya drill bits are more expensive than this set, but there are reasons why they are expensive. There is no big problem in using this copycat. The quality of the drill bit and the concentricity of the chuck affect the feel. , you can ignore it if you don’t care.
The airbrush (Usoda S-130) is fine
The spray pump (Haosheng AS-186) is fine
ABS model glue (Tamiya 87137 ) There are too many advantages. The above Tamiya orange cover and 502 can completely deal with abs
Cutting mat (Usoda UA-90021) Jiuyang or other unknown brands are cheaper, and the cutting mat itself is for office or art use , Usuda just adds a special model, and then raises the price...
Old sponges (bring your own) are no problem
Paint brushes (Usuda UA-90024, seven pack) art store The ones from the supply store are cheaper
It saves more than half the price to buy electrician’s crocodile clips + bamboo sticks alone, but it’s a convenience. Can.
There is no problem with the Beauty Expression Fluid (AMMO AMO 1408)
The airbrush pen holder (two sets of leaf red metal pen holders) is okay
The air tube (double-threaded cloth Tube 1.8M) Doesn’t the air pump come with it? Just buy it if it doesn’t.
The ruler (round hole ruler sprayed on the track wheel) is no problem
The top of the seam glue (Gunshi MC-129) Too early to say...no problem
No problem with soil replenishment with water (gunji SF 284 gray)
No problem with soil replenishment with toothpaste (Tamiya 87653), but the soil replenishment with toothpaste dries and shrinks It’s great, I suggest you keep Wushuang as a spare
The masking fluid (Gunshi M133) is no problem
There is no problem in modifying the copper pipe with a diameter of 0.3mm---1.0mm
AMMO weathering kit AMO-7403 no problem
AMMO weathering soil AMO-3009 qiang metallic color no problem
Water-based paint (all Tamiya paint) no problem
There is no gas mask. Even if it is water-based paint, there are a lot of suspended particles in the spray, which is not a good thing if inhaled into the lungs. At least there is an activated carbon mask or exhaust ventilation
Buy a set of pastels. Black, gray, and brown are more commonly used
Buy some Tamiya enamel paint for stain washing, or you can use oil paint + zippo oil