With the rapid development of science and technology and people's higher pursuit of labor, sweeping robots were born. Sweeping robots were first sold in the European and American markets, and gradually entered China as domestic living standards improved. Irobot? is one of the best brands of sweeping robots. However, since Irobot? is an American brand and most of the instructions are in English, and some customers have lost their life certificates, many people are unable to use the sweeping robot better. So what I want to share with you next is Irobot?. Chinese manual of Roomba?880.
Introduction to Roomba 880
Roomba 880 is the latest generation of household vacuum robot launched by iRobot in 2014. Roomba 880 uses a new revolutionary AeroForceTM high-performance cleaning system. The vacuum suction power is five times higher than the previous generation product, the cleaning efficiency is increased by 50%, and the trash box capacity is 1.6 times that of the previous generation, providing maximum cleaning performance. At the same time, it has the best maintenance convenience.
Instructions before use:
1. After receiving Roomba’s packaging box, you should immediately open the packaging and check whether the machine is intact and whether the accessories are complete, etc. If you have any questions, please contact us in time. return.
2. Please read the product instruction manual carefully to familiarize yourself with the use and operating procedures of Roomba.
Charging Roomba 880:
1. Before using Roomba for the first time, you need to charge Roomba for 16 hours. Before charging, you should first remove the insulating strip at the bottom of Roomba. .
2. Roomba 880 can only be charged using the charging stand. After connecting the charging stand to the power supply, place Roomba directly on the charging stand or if there is remaining power in the Roomba battery, press "Self-seat" ” button to allow Roomba to automatically return to the charging base. When it enters the charging state, the "battery indicator" on the Roomba panel will emit a fast flashing yellow light. When fully charged, the "battery indicator" will show green.
3. During daily use, when Roomba senses that the battery power is low, Roomba will automatically return to the charging base for charging. In order for Roomba to find the charging base as soon as possible, please place the charging base against the wall in a stable and open place. on the ground, and away from plasma TVs, strong light sources, or mirrors.
Charging indicator light
Roomba uses a battery indicator light to display the charging status.
Battery indicator battery status
The red light is solid and the battery is exhausted
The yellow light is flashing and charging
The green light is solid Fully charged
Yellow light flashes quickly for 16 hours of recovery charging
Use Roomba to clean the house
Turn Roomba on and off? 880
Press? The CLEAN button starts Roomba. You will hear a beep and the battery indicator will light up.
Pressing the CLEAN button again Roomba will start the cleaning cycle.
While Roomba is cleaning, press the CLEAN button to pause.
Press the ?CLEAN? button again to continue the cleaning cycle.
Press and hold the CLEAN button until the power indicator light goes out to turn off Roomba.
For best cleaning results, empty Roomba’s trash bin and clean the filter after each use. Use automated virtual walls or virtual wall beacons to let Roomba clean where you want. Wipe the sensor weekly with a clean, dry, soft cloth. Use Roomba often.
Note: Roomba contains electronic components. Do not immerse Roomba in water or sprinkle it with water.
Use only a dry cloth for cleaning.
Set machine prompt language
Roomba? Available in English, French, German, Spanish, Italian, Dutch, Danish, Swedish, Norwegian, Finnish, Polish Troubleshooting messages in English, Russian, Portuguese, Japanese, Korean, and Chinese.
Roomba's default language is English.
To change the default language:
Remove Roomba from the charging base.
Press the CLEAN button to start Roomba.
The battery indicator will light up.
Press the CLEAN key several times until you hear the language you want to select
Press and hold the CLEAN key to turn off Roomba and confirm your language selection.
The cleaning method of Roomba 880
Roomba cleans the floor in a different way than most people. It uses the robot to intelligently and efficiently clean the entire floor, including the bottom of furniture, around it and around the wall. When Roomba is cleaning, it will calculate the best cleaning path and determine when to use which cleaning behavior:
Spiral type
Roomba uses a spiral type of operation,
Concentrate cleaning on one area.
Edge style
Roomba cleans along the edges of a room and navigates between furniture and obstacles.
Crossover
The Roomba criss-crosses the entire room to ensure full coverage.
Dirt Detection
After Roomba detects an area of ??concentrated garbage, the Dirt Detection light will light up and Roomba will use a
back and forth method. Focus on cleaning the area (similar to cleaning with a hand-held cleaning tool)
Roomba? 880’s cleaning mode
Roomba? cleans according to the cleaning mode you choose.
Roomba? has three cleaning modes:
Standard Cleaning Mode
Roomba? automatically calculates the size of the room and adjusts the cleaning time accordingly.
Partial cleaning mode
Roomba? Circles a cleaning area with a diameter of about 1 meter, and then circles back to the starting point to powerfully clean the local area.
Schedule cleaning mode
After setting the scheduled cleaning time, Roomba will enter this mode. Roomba leaves the charging base at the designated time and returns to the charging base to charge after cleaning is completed.
Schedule the cleaning time of Roomba? 880
Set the time
Before setting the scheduled cleaning time for Roomba, you need to set the time:
1. Press the time button
2. Use the day, hour and minute buttons to set the correct time.
3. Please press the confirm button, Roomba will beep once to indicate that the time and date have been set.
Scheduling Settings
Set cleaning schedules
You can preset Roomba to be cleaned once a day,
up to seven times a week.
To set a scheduled cleaning:
1. Press the preset button from
2. Use the day, hour, and minute buttons to set the scheduled cleaning
p>
3. Press the confirmation button, and Roomba will beep, indicating that it has been set up successfully
View scheduled cleaning settings
1. Please press the preset button.
2. Please cycle through the scheduled cleaning times by day.
3. Please press the confirm button.
Clear scheduled cleaning settings
1. Please press the default key.
2. Please cycle through the scheduled cleaning times by day.
3. When Roomba displays the scheduled cleaning time you want to delete, please press and hold the day button for 5 seconds.
The Roomba will beep to indicate that the cleaning time has been cleared.
4. Please press the confirm button.
Change scheduled cleaning settings
1. Please press the default button.
2. Please press the date button to cycle through the scheduled cleaning time.
3. When Roomba displays the scheduled cleaning time you want to change, please press and hold the hour button and minute button to make changes.
4. Please press the confirm button, Roomba will beep, indicating that the scheduled cleaning has been set.
Virtual wall lighthouse partition cleaning
The virtual wall lighthouse can be used as a lighthouse or a virtual wall. In lighthouse mode, it can guide Roomba to clean multiple rooms efficiently and then return to the charging base.
In virtual wall mode, it can block areas you don’t want to clean.
All you have to do is adjust the mode switch to make your selection. No matter which mode, the lighthouse can automatically turn on and off at the same time as the Roomba turns on and off. When turned on, the indicator light on the top of the lighthouse lights up.
Each lighthouse uses two AA alkaline batteries. A flashing power light indicates the battery needs to be replaced.
How to use lighthouse mode
Place the lighthouse at the door with the branded side facing forward. After Roomba has cleaned its first room, the lighthouse will guide it through your home, cleaning other rooms one by one. After cleaning, the lighthouse will guide Roomba back to the charging base to recharge.
You can use both the lighthouse and the virtual wall at the same time. But please don’t bring the two too close, nor too close to the charging base or furniture that can block the invisible beam, otherwise Roomba will not be able to recognize the lighthouse or be unable to return to the charging base.
How to use virtual wall mode
In virtual wall mode, the lighthouse can create an invisible barrier that Roomba cannot cross. It will automatically turn off after Roomba is turned off.
Simply place the lighthouse in the middle of the door frame. Unlike the Virtual Wall, the Virtual Wall Lighthouse comes with a distance selector that allows you to adjust the length of the barrier up to 2.4? meters. Please note: the longer the distance you set, the greater the battery consumption.
Using the guidance function of the virtual wall lighthouse, you can reasonably partition the room, so that Roomba 880 can clean your room more efficiently and quickly.
The emergence of sweeping robots is a new advancement. It allows people to have more free time to enjoy life, and also brings cleanliness and tidiness to the home environment. Its ease of operation also brings a lot of convenience to everyone. If there is anything you don’t understand, have you suddenly understood it after reading the manual shared by the editor? This time the editor shared with you the manual of Roomba 880. You can refer to it, but the specific operation must be based on the model. If you have other instructions you need to know, you can follow Tubatu!
Tubatu provides you with "renovation quotations, 1-4 local decoration companies, and 3 sets of decoration designs online for free." "Plan", as well as strategies to avoid decoration pitfalls! Click this link:/yezhu/zxbj-cszy.php?to8to_from=seo_zhidao_m_jiare&wb, and you can get it for free~