I bought a hot water bottle yesterday, and there is no water in it. How to fill it out? How to plug it when the water injection is ready? Cold or hot water? Please talk specifically about exhaust or something. Just add cold water. There is a small transparent plug on the thermos bottle. Pull it out, this hole is the water injection hole and the exhaust hole.

The specific steps are as follows:

Step one, prepare a beverage bottle.

Step 2, then fill the beverage bottle with water and screw it tightly with a funnel.

Step 3, next, find the water inlet of the hot water bottle (be careful to pull the two sides of the hot water bottle apart, otherwise it will easily puncture the other side).

Step 4, then add water and gently squeeze the bottle.

Step 5: You can add less than two bottles of water. You can lift the thermos bottle, which is about the amount of water shown in the picture below.

Step 6, then lie flat to discharge excess air and plug the water in the hole.

Step 7, dry the hot water bottle with a dry towel.

Step 8, finally try to charge with the power supply, and a hot water bottle is filled with water.

Extended data:

When purchasing and using electric hot water bottles, you should "touch two, look at three and compare" to prevent electric hot water bottles from becoming "pocket bombs"

First, the touch material: the heating element of the heating wire (tube) hot water bottle does not directly contact the liquid, so that the water and electricity are separated, the whole process is insulated, and the temperature is controllable, which is much safer than the electrode type. Consumers can tell by touching the heater of the hot water bottle. The electric heating wire (tube) heater is larger, with a diameter of 7-8 cm, and the electrode heater is very small, with a diameter of 1-2 cm.

Second, look at the logo: when purchasing electric hot water bottles, consumers should pay attention to check whether there are trademarks, national "3C" certification, product certificate, precautions, manufacturer name and other logos on the packaging of electric hot water bottles.

Third, compare more: consumers should compare more when buying electric hot water bottles. Due to the high manufacturing cost of electric hot water bottles, the ex-factory price is mostly above 30 yuan. If it is lower than this price, consumers should buy it carefully.

People's Daily Online-A 29-year-old male singer was blown up by a hot water bottle! Don't buy this hot water bottle!