Model text of air conditioning purchase and sale contract 1
Supplier (Party A):
Buyer (Party B):
1. Product name, trademark, model, quantity and amount:
Total quantity, a set of figures, total amount ￥ amount in words: one million one hundred and ten cents.
Second, the quality requirements, technical standards and quality responsibility:
1. The air conditioner is produced according to the national standard GB/T7725- 1996 Room Air Conditioner.
2. The manufacturer's special after-sales service maintenance network is installed free of charge and guaranteed for 3 years.
3. The free warranty does not include man-made damage and self-installation.
Third, the delivery and installation time:
Four. Mode of delivery and cost burden:
Verb (abbreviation for verb) settlement method:
6. This contract is made in triplicate, one for each party, and one for Kelon Company at the time of declaration.
Seven. Other matters:
VIII. This contract is a * * * page. If an additional page is required, it is valid only if it is stamped with a riding seal.
Party A (official seal): _ _ _ _ Party B (official seal): _ _ _ _ _
Legal representative (signature): _ _ _ _ _ Legal representative (signature): _ _ _ _ _
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Model essay on air conditioning purchase and sale contract II
Supplier (Party A):
Demander (Party B):
The text of the Contract is formulated in accordance with the Contract Law of People's Republic of China (PRC) and relevant laws and regulations. In order to better safeguard the legitimate rights and interests of both parties, through friendly negotiation, Party A signed the following contract on the purchase of air conditioning units from Party B. ..
1. Company, brand, model, quantity and amount confirmed by both parties:
Equipment list:
Second, the delivery time and place:
1. Delivery time: After receiving the notice of commencement from Party A, Party B will enter the site according to Party A's project progress and the time required by Party A. ..
2. Place of delivery:
3. Transportation cost: The transportation cost is included in the contract price.
4. Ownership transfer: After the acceptance of this project, the ownership will be transferred to Party A. Before that, Party B will be responsible for the damage and defects of air conditioning equipment.
5. Contact person or entrusted contact person of Party A:
6. Contact person or entrusted contact person of Party B: Wang Huilin.
Three. Payment terms:
After the signing of this contract, Party B shall pay the equipment deposit, namely RMB. Party B shall deliver all the equipment to Party A within 7 days after receiving the payment, and pay the remaining equipment, namely RMB Yuan, after Party A's acceptance and inventory. Party A's acceptance does not mean Party A's confirmation of the quality, technical standards and brand of the contract products (the company paid the equipment payment in full).
Four, quality requirements, technical standards, the conditions and time limit for the supplier to be responsible for the quality.
All products must meet the technical standards of the manufacturer, and they are all produced by the original factory and have not been used. Equipment quality problems shall be implemented according to the manufacturer's three guarantees.
Verb (abbreviation for verb) Warranty period:
1. After the goods are accepted, Party B shall complete the relevant warranty procedures for Party A and hand over the air conditioner warranty card to Party A, and the warranty period shall be calculated from the date of invoice issuance (that is, the date when all items are accepted);
2. During the warranty period, Party B promises to respond within 24 hours after receiving Party A's notice of repair. After-sales service after the warranty period, the specific details shall be negotiated separately by both parties.
3, equipment warranty according to the relevant provisions of the manufacturer.
On the dispute resolution of intransitive verbs;
During the performance of this contract, any dispute between the two parties shall be settled through friendly negotiation. If negotiation fails, it shall be decided by the court where Party A is located.
Seven. Liability for breach of contract:
If Party A delays payment or Party B delays delivery (except for force majeure), it shall pay the other party a penalty of 0.5% of the payable amount every day, and the total amount of penalty shall not exceed 5% of the total amount. If the number of days of delay exceeds the number of days of contract performance, the breaching party shall bear the corresponding liability for breach of contract.
Eight. Others:
1. For matters not covered in this contract, Party A and Party B shall reach a written supplementary agreement through negotiation, and the supplementary agreement shall have the same effect as this contract.
2. This contract is made in duplicate, with Party A and Party B holding one copy respectively. This contract shall come into effect as of the date of signature.
3. The total contract amount is final, and Party A will not bear any additional expenses (except for the increase and change of external demand for drawings).
Party A (official seal): _ _ _ _ Party B (official seal): _ _ _ _ _
Legal representative (signature): _ _ _ _ _ Legal representative (signature): _ _ _ _ _
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Model text of air conditioning purchase and sale contract 3
I. Both parties
Demander: (hereinafter referred to as Party A)
Supplier: (hereinafter referred to as Party B)
2. Quality requirements, technical standards, conditions and time limit for suppliers to be responsible for quality: design parameters are based on Simpson manufacturer's technical standards and construction drawings. The warranty period is two refrigeration and heating cycles after the air conditioner has passed the debugging. During the warranty period, when the equipment fails, the seller's technicians must be present for maintenance within 4 hours after receiving the written, oral, telephone or electronic notice from the buyer.
3. Place, time and receiving unit of delivery: the site of Yulong Hotel, Fuxing Road, Shangcheng District, Hangzhou. The delivery time is agreed within 70 days after the contract is signed, and the buyer shall inform the supplier of the specific delivery time 7 days in advance. The receiving unit is the name of the buyer's unit.
4. Delivery mode fee: the buyer requires the supplier to deliver it to the construction site free of charge.
5. Reasonable loss and calculation method: All losses during transportation shall be borne by the supplier.
6. Supply and recycling of standard packaging materials and expenses: packaging according to the manufacturer's standards, packaging is not recycled.
7. Acceptance criteria, methods and time limit for raising objections: Acceptance shall be conducted according to national standards, construction drawing parameters and technical standards of the manufacturer. The acceptance method is to meet the design requirements and use requirements 1 month after the equipment installation and debugging is completed.
Eight. Payment method and time limit: the buyer shall pay 30% of the contract price as the down payment within one week after the contract is signed, 60% of the contract price shall be paid by the buyer after the equipment arrives at the delivery place, and the remaining 65,438+00% shall be paid in one lump sum after the installation and debugging is completed. The supplier shall provide a bank guarantee of 5% of the contract price for equipment maintenance.
Nine. Guarantee and liability for breach of contract: the equipment warranty is guaranteed in the form of bank guarantee. In case of breach of contract during the performance of the contract, the breaching party shall bear 20% of the contract price as liquidated damages.
X. Ways to resolve contract disputes: The relevant provisions of the Contract Law shall apply. In case of any dispute during the performance of the contract, both parties shall settle it through friendly negotiation. If negotiation fails, it shall be under the jurisdiction of the court where the buyer is located.
XI。 Other agreed matters:
Party A (official seal): _ _ _ _ Party B (official seal): _ _ _ _ _
Legal representative (signature): _ _ _ _ _ Legal representative (signature): _ _ _ _ _
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
The model of air conditioning purchase and sale contract is very simple. Three related articles:
★ Simplified version of air-conditioning sales contract model 3 latest article
★ 3 concise models of air-conditioning sales contract
★ Latest 3 pieces of air conditioner supply contract model
★ The latest three demonstration clauses in the air-conditioning sales contract
★ Classic air conditioning sales contract model essay 3 latest.
★ Purchase and sale contract of demonstration air conditioning equipment
★ Simple Edition of 3 Model Terms of Electrical Appliances Purchase and Sale Contract
★ Model air conditioning purchase and sale contract
★ Model air conditioning purchase and sale contract
★ Simple 3 sample blinds purchase and sale contract.