The "energy efficiency label" affixed to household appliances such as refrigerators and air conditioners is used to clearly inform consumers of the energy efficiency grade information of the product. According to the requirements of relevant national standards, the product's energy efficiency label should be posted in a conspicuous position on the front of the product to facilitate consumers to obtain relevant information at the first time.
The energy efficiency label does not have any function or function other than "informing consumers", and any manufacturer will not and will not decide whether to perform its due obligations and responsibilities based on the existence of the energy efficiency label.
Extended data
Precautions for refrigerator use:
1, often clean the dust on the condenser and compressor at the back or bottom of the refrigerator. You can use a vacuum cleaner or brush to remove dust. Be careful not to wipe the dust on the refrigerator and compressor with a wet cloth.
2. When the refrigerator is out of service for a long time, you should first cut off the power supply, take out all the food in the refrigerator, clean the inside and outside of the refrigerator, and open the door for several days in a row to make the refrigerator fully dry and dispel the peculiar smell in the refrigerator.
3. Check the drain pipe. If the drain pipe is blocked, water will leak into the refrigerator. Poke the drain pipe with a wire to remove the things accumulated on the drain pipe.
4. Don't neglect the cleaning of the door sealing strip. Dilute the bleach with 10 times of water, and then dip it in a toothbrush to clean it. Finally, rinse the bleach with water. The adhesive tape is dirty and easy to age, which will affect the tightness of the refrigerator and increase power consumption.
5. Check the vibration, noise and temperature of the compressor. When touching the compressor shell during operation, there should be no obvious vibration, and the compressor should not be started obviously during the day.
6, pay attention to check whether there is a crack in the power cord, to prevent leakage.