Methods (1) Physical cleaning:

Before removing the logo sticker from the windshield, you can soak the logo with a hot towel. When it is soaked, some logo stickers can be easily torn off.

Method 2: Physical cleaning method.

If there is a solar film on the front windshield, you can wipe it repeatedly at the logo with a towel dipped in a small amount of alcohol, but you must never spray it directly on the glass, otherwise it will damage the car film.

Method 3: Thermal cleaning method

It's simple. This is a hair dryer for hairdressing. If possible, use a long patch panel to lead the power to the outside, plug in a hair dryer, and heat the surrounding signs back and forth with hot air. In a short time, all kinds of signs can be easily eliminated.

Method 4: Chemical cleaning method

If you tear off the logo sticker, there will still be a lot of colloid on the windshield. Don't worry, you can buy a bottle of professional glue remover from the market, apply it on the glue, wait for 5 to 10 minutes according to the specifications of the glue remover, and then wipe it clean with a paper towel.

Methods Five electrostatic paste removal methods were used.

Of course, what I said before is the method of "mending after the sheep dies". The simplest and most effective way is to spend a few dollars to buy an electrostatic sticker (you can buy it online for a few dollars 10), first stick the electrostatic sticker on the windshield, and then stick the logo on the electrostatic sticker!