Using a tag gun, the introduction and how to use it are as follows:

A tag gun is mainly used to hang tags on clothing, socks, towels, floor mats, dishcloths, etc. Tools commonly used in daily necessities.

Operation method:

1. Install the glue needle and insert the attached glue needle into the circular gap at the top of the tag gun.

2. Attach the label, insert the needle through the label hole and fabric, and tighten the trigger.

3. Put on the blade. When inserting the new blade, be careful to install it in the correct position, that is, insert it to the top.

4. Adjust the steel needle internally to align the needle cap with the needle head, turn the needle latch forward, and withdraw the needle.

Note:

There are two types of tag guns: thick and thin, so be sure to distinguish between them. The thick tag gun is suitable for thick clothes, and the thin tag gun is suitable for thin clothes or some high-end clothes. The needle of the thick tag gun is thick and the needle hole is large, so it should be used in conjunction with the thick I-shaped plastic needle. The needle of the thin tag gun is thin and the needle hole is small. It should be used with a fine I-shaped plastic needle.

In addition, in foreign trade, there is no thickness of tag guns. Generally, only standard guns and thin guns are used. Standard guns are what we call thick guns in China.

Important Tips:

Do not point the gun at people or animals to avoid shooting out needles. Do not use the gun as a toy for children as the needles are very sharp.