As a widely used repair material, plastic steel mud is used to repair heating leakage, pipeline floor drain and hard objects. One of its most important functions is repair, in addition to leakage prevention, molding, heat preservation and so on. Which brand is the material of plastic steel mud? Are there any related recommended brands? How should the plastic steel mud be constructed after purchase? What are the specific steps? Are there any precautions during construction?

1. Which brand of plastic steel mud is good? What are the relevant suggestions?

1, Yuhong (national high-tech enterprise, Beijing brand product, Beijing famous trademark, Beijing Oriental Yuhong Waterproof Technology Co., Ltd.)

2. Gao De Da Fu Ke (Gao De (Guangzhou) Building Materials Co., Ltd., a subsidiary of PAREX Group of France, one of the leaders of domestic special dry-mixed mortar industry, and a major building mortar enterprise in the world).

3. Resistant to Bosch (Guangzhou Huolun Building Materials Co., Ltd., a high-tech enterprise specializing in R&D/ manufacturing/product marketing/technical consultation of building waterproof materials)

4. Zhuobao (Guangdong famous trademark, leading supplier of building waterproof materials, environmental label product, national high-tech enterprise, Shenzhen Zhuobao Technology Co., Ltd.)

5. Sikasika (from 19 10 Switzerland, a famous brand, a leading global professional building chemical product company, a global integrated company, Sika (China) Co., Ltd.).

Second, how should plastic steel mud be constructed?

1. Thoroughly clean the construction surface and grind it into a rough surface with sandpaper to enhance the adhesion. 2. Take the same amount of 1: 1 (volume ratio) from component A and component B, and mix them evenly into the same color. When the colloid sticks to the hand, it can be solved by wetting the hand. The mixing method adopts the "twisting" method of repeated stretching, twisting and folding. 3. A little pressure can make it fit tightly during construction, and it should be dipped in water or leveled with appliances after construction. 4. The load-bearing objects should be fixed in place with tools. After the special colloid is completely cured, the tools should be removed and put into use. ? 5. After the construction is completed, please wipe it with a wet rag and try to keep the surrounding environment clean.

Third, what are the precautions for plastic-steel slurry construction?

1. After the operation is completed, please clean it thoroughly with clean water to avoid leaving hands. 2, if you have allergic skin, please wear gloves to operate. 3. Please store the rest of the tonic in a cool place and keep it properly to prevent children from eating and misusing it. 4. Please delay the use of hanging weights or high pressure (water pressure) to ensure the effect. 5. If there is oil or dirt on the bonding surface, it needs to be cleaned, otherwise it will affect the bonding effect. When the product is completely cured below 6.25℃ for 8 hours, the operation time of the two agents A and B is only 40 minutes, and the viscosity will be lost after the time is exceeded. The shorter the complete curing time, the shorter the operation time, the lower the temperature and the longer the curing time. If you want to accelerate curing, you can accelerate curing by heating and baking with a hair dryer.

In fact, there are many plastic steel mud on the market as a choice of repair materials. Facing many brands, Bian Xiao mainly recommended five brands with good reputation, namely Yuhong, Gaode, Naibosch, Zhuobao and Sika. You might as well refer to it. In the construction of plastic steel mud, the steps will be relatively complicated. The specific operation process is introduced in Xiaobian, so you can learn it. Of course, there are also some precautions in this process, which we should pay considerable attention to, especially to avoid material residue.