We often want to remove the unused stainless steel labels from the stainless steel fuselage, but often the stainless steel labels are tightly attached to the stainless steel fuselage, which cannot be removed by general cleaning. So how to skillfully remove these unwanted things? Here are some ways to try! 1. Wipe with wind oil essence.

2. soak in hot water for a while.

3. Wipe with a cloth dipped in alcohol.

4. put a little detergent in it and brush it with an old toothbrush.

5. You can try rubber. Will test people's perseverance! Persistence can always be erased!

Generally speaking, the effect of the above methods is still unsatisfactory, and the following methods are all good ways to remove stainless steel labels collected from the Internet! (for reference only):

There are always some labels on newly bought stainless steel pot or glassware. After the label is torn off, it is difficult to remove the traces left by the adhesive on it. Scraping with a knife and wiping with a wet cloth often leave traces. For the self-adhesive marks on the surface of hard objects, we can apply grease-free nail polish remover on the surface of the object, and then gently wipe it with a soft cloth. These traces can also be removed with industrial alcohol or gasoline. If these stickers get on the skin, we can also use lemon juice to remove them.

In addition, hand cream can also achieve the effect of removing adhesive. Hand cream contains a lot of water (generally above 70%). Water contains a certain amount of surfactant. Surfactant has good wetting, penetrating and dissolving ability, and can quickly penetrate between the adhesive and the surface of the object, so as to achieve the purpose of removal. You can also find some similar products, such as face cream, facial cleanser and detergent, which have the same effect.

For the stubborn adhesive on the carpet, the best way is to carefully trim the adhesive traces on the top of the carpet fluff.

A variety of reference methods are provided below:

1. Wipe off with a little sodium chloride solution. Or use paint thinner.

2. Repeatedly stick and tear with transparent adhesive. You can remove some surfaces.

3. Wipe with special cleaner or sports shoes decontamination cream.

You can blow-dry it with a hair dryer and then scrape it gently.

5. Wipe with a cotton swab dipped in nail polish remover.

6. Soap containing a little mixture of ammonia and turpentine can remove a lot of dirt and make the glass surface more shiny (this article is suitable for tiles, ceramics, glass, etc. ).

7. Wipe with essential balm.

8. You can erase it with 4b eraser for painting, which is a very soft Korean eraser.

9. You can use a hot towel to wipe off the traces of hardening for a long time!