Life Hack: How to Remove Rust from Metal

1

Use white vinegar. Vinegar can dissolve rust on metal surfaces. Soak the rusted metal in white vinegar, let it sit for a few hours, and then wipe away any remaining rust.

If the metal object is too large to be soaked in white vinegar, pour a layer of white vinegar over it and let it sit for a while. You can also wipe away rust stains with a rag soaked in white vinegar.

Try dipping tinfoil in white vinegar and scraping off the rust. Although the friction of tin foil is not as good as the steel wool used for cleaning pots, it can still remove rust.

Ordinary vinegar can also remove rust. Soak rusty metal items in it and rinse clean after 24 hours. This way, you don’t need to bother wiping it off.

Try lime and salt. Sprinkle the salt over the rusty areas, then squeeze the lime juice over the salt. The more lime juice the better, then let it sit for 2 to 3 hours, and finally scrape off any remaining rust stains.

Use lime peel to remove any remaining rust stains from the metal. It can effectively remove rust layers without damaging the metal surface.

If limes are not available, you can substitute lemons.

Make the baking soda paste. Add water to the baking soda and make a paste thick enough to coat the metal. After applying the baking soda paste, let it sit for a while and then scrub it clean.

Try brushing off the baking soda paste with a toothbrush, then rinse with water.

How much water should be added to baking soda depends entirely on your own feeling, and there is no standard ratio.

Use potatoes and dish soap. Cut the potatoes in half and soak the cut sides in dish soap. They react chemically with the rust layer, making the rust stains easier to remove. Place the potatoes on top of the rust and leave for a few hours.

If one time is not enough, just cut off the used part of the potato, soak it in dish soap, and continue to place it on the metal object.

If you don’t have dish soap, you can use baking soda and water instead.

Use oxalic acid. Take protective measures before using this method. Wear rubber gloves, goggles and protective clothing. Do not breathe any oxalic acid gas.

Rinse the rusty item clean with detergent and then dry it carefully.

Mix 25ml of oxalic acid and 250ml of warm water.

Soak the item for about 20 minutes, then clean it with a rag or brass brush.

Wash away any rust stains and dry metal items. Finish. Life Tips How to Remove Foaming Agent

Uncured foaming agent can be cleaned with acetone (foaming agent cleaners are available in the building materials market)

Cured foaming agent Styrofoam can only be removed mechanically.

After it dries, you can use styrofoam cleaning agent, which is specially used to clean styrofoam. It is a bit laborious after it dries, but it can also clean the yellow stains on the sheets. How to remove them with clever life tips

For yellowed sheets, we must wash them in the correct way. First, we expose the yellowed sheets to the sun for 1-2 hours. Exposure to the sun will make the sheets whiter, making it easier to wash away yellowing marks.

After exposure to the sun, we soak the yellowed sheets in water at normal temperature for more than 1 hour. Requesting a video: Housekeeping Queen’s life tips on how to remove rust from clothes

I couldn’t find a video. I can suggest some tips:

Tips for removing rust from clothes: 1. Soak the rusty area with boiling water, apply sour milk, and wash with soap. 2. Remove rust stains: Wipe the rust stains on the clothes with 1% oxalic acid solution, and then rinse with clean water. To remove rust from clothes, you can use sour salt (available in pharmacies, also known as potassium tetragonate). It can be removed by washing with dissolved water. Or you can cover the stain with salt first, then soak it in white vinegar for an hour and then clean it as usual. 3. It is not very easy to use undiluted oxalic acid. Pour it directly on the clothes and it will be white and clean. However, you must wear gloves, otherwise it will cause damage to the panel. 4. If your clothes are stained with rust, you can first moisten the rusted area with boiling water, then apply it with old vinegar and rub it. After a few minutes, rinse with boiling water to remove the rust.

1. Wipe the stain with 15% acetic acid solution (15% tartaric acid solution is also acceptable), or soak the stained part in the solution, and then rinse with clean water the next day.

2. Use 10% citric acid solution or 10% oxalic acid solution to moisten the stained area

, then soak it in concentrated salt water, wash and rinse the next day.

3. If white cotton and cotton-blend fabrics are stained with rust, you can put a small grain of oxalic acid (available in pharmacies) on the stained area, drop some warm water on it, rub it gently, and then rinse it with clean water Rinse clean. Be careful to operate quickly to avoid corrosion.

4. The easiest method: If you have fresh lemon, you can squeeze out the juice and drop it on the rust stain and rub it with your hands. Repeat several times until the rust stain is removed, and then wash it with soapy water. Tips on how to remove moles

1. Food mole removal method

If the mole is lighter in color or smaller in number, you can use some foods that are very easy to see to remove it.

① Peach Blossom and Melon Seed Honey: Grind peach blossoms and winter melon seeds into powder, mix the two in equal parts, mix an appropriate amount of honey, apply on the face, and apply to the affected area every night before going to bed. If you have a black mole, apply it in spots. Effective cleansing and spot removal. Suitable for moles, dark spots and freckles.

②Eggplant juice: 1 eggplant, slice it and squeeze the juice, rub the area with the mole, 3 times a day, the effect will be visible in ten days.

Note: This method is only suitable for friends with lighter moles.

2. Laser mole removal

Nowadays, many hospitals can laser mole removal. The advantage of this method is that it can remove larger moles, and it is faster and more thorough. However, it has the disadvantages It is also more obvious. If it fails, it will leave obvious scars, and the cost is relatively expensive.

3. Mole removal with potion

The advantage of mole removal with potion is that it is more convenient and you can do it at home. Moreover, the price of potion is cheaper and larger than laser mole removal. Moles can also be removed. The disadvantage is that there are many counterfeit products on the market and it is easy to buy ineffective products. Tips for life: How to remove the spiciness from white radish

If you are afraid of spiciness, you can cut the radish into shreds and soak it in water for a while. This will remove the spiciness from the radish. Add seasonings such as Delta, salt and aroma. Just stir in green onions, coriander and vinegar! Tips on how to get rid of fleas

To get rid of small fleas:

1. Homemade external spray

Combine orange peel, grapefruit peel, 3 cloves of garlic, about 500 ml Mix the water together, stir evenly with a juice fryer, then heat it over low heat for 15 minutes, wait for it to cool, then put it in a spray bottle. Just avoid the eyes and spray it directly on the pet.

2. Natural plant aromatherapy method

In addition, when using pillows and sleeping mats for pets, it is easiest to put some cedar, eucalyptus laurel leaves, and mint leaves around them (pharmacies) There are some that are sold and very cheap) and can easily drive away fleas on pets.

3. Food therapy method

Mix a spoonful of vinegar in about 1000 mg of water and use it as daily drinking water for pets. It is very effective in preventing fleas and ticks. (Recommended for long-term use) Tips on how to remove label glue

Here are several methods, I hope it will be helpful to you...

1. Apply facial oil and wipe Evenly, first use your nails to pick it off, then wipe it off with a wet towel.

2. Use a hair dryer to heat the glue and you can remove it.

3. Just rub it with the essential oil and it will fall off after a while. Give it a try.

4. You can try using an eraser. But at the beginning, you may feel that the more you wipe, the dirtier it becomes. But if you wipe for a longer time, you will see the effect. This method is relatively tiring, so you need perseverance.

5. Soak it in water, add a little detergent, and then brush it with an old toothbrush.

6. You can also wipe it with a cloth dipped in alcohol or Erguotou.

7. Use soap and a little mixture of ammonia and turpentine to remove a lot of dirt and make the glass surface more shiny (this article applies to ceramic tiles, ceramics, glass, etc.).

8. Use transparent glue with good viscosity to peel off repeatedly to remove some of the surface.

9. Use a little sodium chloride and water to wipe it off, or use paint thinner.

10. Wipe with a cotton swab dipped in nail polish remover.

11. Use special detergent or sports shoe decontamination paste to wipe.

12. If the marks that have been left for a long time have hardened, you can use a hot towel to soften them before trying again.

Answer from Tonghui trademark self-adhesive sticker printing company,

Please accept it if you are satisfied, thank you. Life Tips How to Remove Stains

You want to ask where to remove stains? Clothes or shoes or something else? I have a few different ways to remove stains. Life Tips on How to Remove Stains on Clothes

If it is an oil stain, just use dish soap to dot the stain, and then clean it after a while. If the clothes have turned yellow, you can soak them in rice water and then wash them, and the clothes will become brighter.