JMOWTO is a registered trademark of Chaozhou Chaoan District Hongliang Sanitary Ware Co., Ltd. Chaozhou Chaoan District Hongliang Sanitary Ware Co., Ltd. was registered in the Industrial and Commercial Administration of Chaoan District, Chaozhou City on May 16, 2013 Bureau was incorporated. JMOWTO is now generally called Jie Mi. The English name is a bit like Jiumu Wang, but it has nothing to do with Jiumu Wang. If you mind, you can consider some big brands at home and abroad.

Let us see how to check the pros and cons of the toilet

1. Water consumption. To ensure that the waste is flushed cleanly, the old siphon toilets need to consume a lot of water, which is more water than the direct flush toilets. However, after later improvements to the curves, the water consumption of current siphon toilets and direct flush toilets is similar, but slightly more than that of the latter.

2. Scouring intensity. Due to the use of the gravitational potential energy of water and its special steep structure, with the same water consumption, the flushing force of the straight-discharge toilet is greater, while the performance of the siphon toilet will be inferior. At the same time, the size of the scouring force will also affect the cleanliness of the scouring surface. The inner wall of the toilet will be contaminated with some dirt, and the cleaning effect of the direct-discharge toilet will be better.

3. Flushing noise. No toilet can flush silently. However, in comparison, the flushing process of direct flush toilets is simple and rough, and the sound will be louder. Siphon toilets use the difference in pressure and liquid level to make less noise.

So how to choose a household toilet?

1. Weight. The heavier the toilet, the better. An ordinary toilet weighs about 50 kilograms, and a good toilet weighs about 100 kilograms. Toilets with heavy weight have high density and relatively good quality. A simple way to test the weight of the toilet: pick up the water tank cover with both hands and weigh it.

2. Water outlet. It is best to have only one drainage hole at the bottom of the toilet. Many brands now have 2-3 drainage holes (according to different diameters), but the more drainage holes, the more impact the momentum will have.

3. Glaze. Pay attention to the glaze of the toilet. The glaze of a good quality toilet should be smooth, smooth, without bubbling, and the color should be saturated. After inspecting the outer surface glaze, you should also touch the toilet drain. If it is rough, it will easily cause accidents in the future.

4. Caliber. Large-diameter sewage pipes with glazed inner surfaces are not easy to get dirty, discharge sewage quickly and powerfully, and effectively prevent blockages. The test method is to put your whole hand into the toilet mouth. Generally, it is best to have a palm capacity.

5. Water tank. Leakage in the toilet water tank is generally not easy to detect except for the obvious dripping sound. A simple way to check is to drop blue ink into the toilet water tank, stir it evenly and see if there is blue water flowing out of the toilet water outlet. If there is, it means the toilet is leaking. Where the water is leaking. As a reminder, it is best to choose a water tank with a higher height, so that the momentum is good.