2. Rub it with essential balm, and it will fall off after a while. Try it.

3. You can try the rubber. But at the beginning, you may feel that the more you rub it, the dirtier it is. But if you rub it for a long time, you will see the effect. This method is more tiring, so you should have perseverance.

4. soak it in water, put a little detergent, and then brush it with an old toothbrush.

5. Wipe it with a cloth dipped in alcohol or spirit Erguotou.

I bought a stainless steel basin last winter. I baked it on the heater. The label is easy to take off and there is no trace left.

There are also the following things I found on the Internet for your reference:

The Law of Removing Self-adhesive Trademarks

There are always some labels on newly bought stainless steel pots or glassware. After tearing off the labels, it is difficult to remove the traces left by the self-adhesive on them. Wiping with a wet cloth or scraping with a knife often leaves traces. After many times of practice, I have summarized some tips to share with you.

For the self-adhesive marks on the surface of hard objects, we can apply grease-free nail polish remover to the surface of the objects, and then gently wipe them with a soft cloth; These traces can also be removed with industrial alcohol or gasoline. If these stickers get on the skin, you can also use lemon juice to remove them.

In addition, hand cream can also achieve the effect of removing self-adhesive. Hand cream contains a lot of water (generally above 7%) and a certain amount of surfactant. Surfactant has good wetting, penetrating and dissolving ability, and can quickly penetrate between the adhesive and the surface of the object, thus achieving the purpose of cleaning. You can also find that some similar products, such as face cream, facial cleanser and detergent, have the same effect.

For the stubborn adhesive on the carpet, the best way is to carefully trim off the adhesive traces at the top of the carpet fluff.

other methods:

1. Soap with a little mixture of ammonia water and turpentine can remove a lot of dirt and make the glass surface more shiny (this article is applicable to ceramic tiles, ceramics, glass, etc.).

2. Repeatedly sticking and tearing with transparent adhesive can remove some surface

3. Wipe it off with a little sodium chloride solution, or use paint thinner.

4. Blow it dry with a hair dryer, and then scrape it gently

5. Wipe it with a cotton swab dipped in nail polish remover.

6. Wipe with wind oil.

7. Wipe with special cleaner or sports shoes decontamination cream.

8. You can erase it with 4b eraser for drawing, which is a very soft Korean eraser.

9. If the trace left for a long time has hardened, you can soften it with a hot towel before wiping it.