Current location - Trademark Inquiry Complete Network - Trademark registration - How to tear off labels
How to tear off labels

Method 1: Hair dryer

Since the adhesive used in the trademark label is not resistant to high temperatures, use the warm air of a hair dryer to bake it first until the stickiness of the trademark or seal weakens. Then you can peel off the label cleanly.

Method 2: Hot water + towel

First of all, check what you want to remove the label from. If you are not afraid of water, you can prepare a basin of hot water first and then remove the label. Soak in water for half an hour. First of all, look at what you want to remove the label from. If you are not afraid of water, you can prepare a basin of hot water first, and then soak the item in the water for half an hour. Take it out after half an hour. The label will be basically soaked by this time. You can use a towel to wipe off the label.

Method 3: Steel wool

If you are not afraid of affecting the appearance of something, such as the label on a knife, then you can use a dishwashing steel ball to erase it. This The wipe is still very clean, but it is not suitable for porcelain because it is easier to erase scratches and affect the appearance.

Method 4: Eraser

There is another method often used in schools, which is to first tear off the labels that can be peeled off, and then use an eraser to erase them. Tags can be cleared.

Method 5: Toothpaste

Apply toothpaste evenly on the surface of the sticker, leave it there for a while, and then wipe it with a soft rag. Sometimes there is more sticker than It is firm, just apply toothpaste on the traces that have not been removed once. The method is the same and you can remove the sticky sticker that is a headache. The principle is that toothpaste contains glycerin, which is a good solvent and can dissolve the components of the sticker. In addition, many cosmetics also contain glycerin, which can also be used to remove stickers. Essential oil, detergent, cooking oil, vinegar, kerosene, hand cream, etc. can also be used to remove label paper.

Method 6: Sealing tape

This method is useful for removing price tags that were half-torn when you tried to remove them. It can also help you remove any remaining adhesive residue and any remaining price tags. Start by wrapping a section of sealing tape around your index and middle fingers. Let it form a circle, sticky side out. Then attach the sticky part of the sealing tape to the remaining adhesive. Tear it off again. The sticky part of the sealing tape will stick to the adhesive on the surface and remove some of the adhesive. Repeat until clean. If the tape becomes less sticky before you're done, you can use the other side or replace it with a new section.