1. If the login password is forgotten, the router can only be reset. The method for resetting the router is as follows:

The method for restoring the factory settings of the router is to press and hold the reset button (small round hole) on the back of the router until the sys light of the router is off or always on, and then let go, so that the reset is successful, and you can log in again after the reset.

2. After reset, the router needs to be reset before it can surf the Internet normally!

3. Modify the login password of the router as follows:

Log in to the router interface 192.168..1, click Advanced Settings-System Tools-Modify Password, and click OK after modification.

what should I do if I forget my password? Many friends say that it is too much trouble to use cracking software. Here, Green Tea Xiaobian teaches you to restore the router factory settings to get the router default password. The following Green Tea Xiaobian takes tp-link router as an example to teach you to retrieve the router password.

How to restore the router to factory settings:

After the router is restored to factory settings, the password will also be restored to the default state, so that the password will be clear!

1. There is a small hole on the front/back panel of the router with the word "reset" beside it;

2. Turn off the power of the router, find a sharp object like a pen tip and press the reset key;

3. Power on the router, wait for about 3-1 seconds, and then let go after the m1 and m2 lights flash three times at the same time (the wireless router flashes the system light three times), and the reset is successful;

4. Note that the router will be reset to factory settings, and the default login ip is

192.168.1.1; The default user name and password are admin/admin. Please pay attention to whether the ip address of your computer is at 192.168.1.x (1 <;

x< 255)!

If you forget the router password, you can get your router password by the above methods. Is it convenient?