With the gradual improvement of my country’s rapid ETC non-stop management system, the Ministry of Transport has proposed to ensure that the utilization rate of ETC reaches 90% by the end of 2019. At this time, there will be a situation where "thousands of rapid There is only one left by manual labor, ETC is not installed, and the queue is long and laborious.” It seems that now, in response to the call of the government, various banks have successively released some preferential policies for applying for ETC, such as free application for ETC, discounts on highway tolls, instant gas discounts and other measures, and provide services based on online and offline However, many people do not know much about how to use ETC, how to charge ETC, and how to recharge ETC online when receiving free ETC cards and equipment online. I will explain them one by one below.

(Picture of proper ETC card insertion)

This type of ETC card is generally divided into three types, namely charge card, membership card (deposit card) and bank credit card co-branded shoe travel card , their card insertion methods are all the same.

ETC installation method (photo of how to insert ETC card)

(Photo of proper ETC card insertion)

1. After receiving the ETC card and electronic label ( OBU), you should check whether it is damaged. Press and hold the anti-tamper button on the back of the OBU, the green light will flash briefly, and the OLED screen will display the words "Invalid logo" and "Please insert card", indicating that the device is normal.

(Picture of correct ETC card insertion)

2. Then clean the windshield to ensure that the glass surface is smooth, clean and comfortable, and then remove the OBU sticker The protective film is attached to the assembly position: small and medium-sized vehicles such as cars and trucks are attached to the upper and middle levels of the windshield; large and medium-sized vehicles such as large trucks and buses are installed at the lower end. But avoid sticking it to the black area of ??the windshield, as this will affect the charging of the OBU solar panel.

(ETC appropriate card insertion picture)

3. Press the edge of the electronic label lightly to drive away the bubbles, and keep pressing for 2-3 minutes.

ETC activation method

1. Continue to insert the ETC card 2 times until the electronic tag screen displays "Mobile phone Bluetooth is on". If the electronic tag is not attached, insert 2 This time it shows "Invalid flag", which is a normal situation and does not affect activation. You can also instantly turn on the Bluetooth function by lightly pressing the button on the top of the electronic label.

2. Turn on Bluetooth on your mobile phone, open the Yuetongbao app WeChat applet (please download the corresponding mobile app according to the brand of the electronic label, there is usually a download QR code on the electronic label), enter Go to the device activation page.

3. Then click the device connection and wait patiently for the "Connection successful" prompt.

4. Then submit a photo of the front face of the vehicle to activate it.

How to use ETC

1. The ETC buying and selling area is 8 meters. When there is a vehicle stranded in front of you, in order to prevent the ETC equipment of the vehicle in front from malfunctioning or failing. The ETC device should be kept at least 10 meters away from the car in front to avoid the situation where the automatic induction pays for the car in front.

2. The ETC lane driving identification speed should be less than 20km/h. If the speed is too fast, the vehicle equipment information cannot be loaded, causing the deduction to fail.

3. If the vehicle cannot pass through the ETC lane, try to turn and pass again. You can also follow the guidance of the on-site staff to go to the manual MTC lane, swipe your credit card or pay cash in the self-service or manual lane. Or if you enter the ETC lane by mistake, you can turn back to the normal lane.

4. Unauthorized disassembly and assembly of mobile OBU equipment, OBU without power, ETC electronic label falling or falling off, etc. will cause the ETC electronic label to be invalid. The ETC equipment can be obtained from the financial institution that applies for an ETC card. You can go to the agency or highway service department to complete the inspection, and the reactivation is invalid due to loose stickers. When re-obtaining the ETC electronic tag, pay attention to waterproofing, moisture-proofing, and strong magnet resistance.

One million car purchase subsidies