In daily life, food, clothing, housing and transportation are indispensable. Home improvement is also an important issue in our daily life. Decoration pays attention to skills, how to make our home clothes conform to our own style and follow the fashion trend; Save time and effort. How to do waterproof measures in toilet? Below, I will tell you about the decoration matters needing attention.

First of all, we must deal with the grassroots. First, clean up the construction site. If there are cracks or cavities around pipes and floor drains, V-shaped grooves should be chiseled for repair and reinforcement. After the surface of the base is cleaned, it needs to be wetted with water as a whole.

Second, we must repair key parts. The joint between the wall and the ground and the joint between the sewer pipe and the ground are the most prone to water leakage. Before waterproofing, it is necessary to use the special repair mortar for kitchen and bathroom to make the "R" angle, and the treatment must be meticulous and not sloppy.

The third is the overall waterproof treatment. After the repair is completed, the whole body shall be painted with durable waterproof slurry special for kitchen and bathroom. In order to achieve better waterproof effect, the general bathroom wall waterproof should be about 1.8 meters high, and it is recommended to be full height if conditions permit. If it is a light wall (such as gypsum board, etc. ), you must draw the full height; The kitchen wall should be at least 0.3 meters high, and the water-using parts such as the vegetable washing pool should be 0.5 meters higher than the water outlet; Door frames and sill stones should also be painted in place to prevent moisture regain.

Fourth, do a closed water test. After the waterproof layer is dry, all sewers should be blocked, and a "low wall" should be built at the door for water injection test. The water injection height is about 20cm. After 48 hours of inspection, if the water level does not drop significantly, the waterproof quality is qualified. On the contrary, it is necessary to find out the water leakage point, and then do the closed water test after maintenance until it is qualified.

The above is an introduction about the waterproof of the bathroom. Do you know more about it through the above reading? If you want to know more about toilet waterproofing, please pay more attention to the information on our website, which will provide you with more complete, detailed and updated information.