1, Anhui

The total waste is 2625-2685 yuan/ton, and the 50 yuan/ton is increased. Pig iron for machine parts is 2860-29 10 yuan/ton, and 50 yuan/ton is raised, and motor iron is 2600-2750 yuan/ton, and 50 yuan/ton is raised.

Punched lace material is 2850-2880 yuan/ton, and the price is increased by 50 yuan/ton.

2. Shandong

The total waste is 2385-2435 yuan/ton, and the 50 yuan/ton is increased. Pig iron for machine parts is 2,850-2,900 yuan/ton, and 50 yuan/ton is raised, and motor iron is 2,660-2,760 yuan/ton, and 50 yuan/ton is raised.

Punched lace material is 2830-2880 yuan/ton, and the price is increased by 50 yuan/ton.

3. Jiangsu

The total waste is 2325-2385 yuan/ton, and the 50 yuan/ton is increased. Pig iron for machine parts is 2,870-2,920 yuan/ton, and 50 yuan/ton is raised, and motor iron is 2,690-2,740 yuan/ton, and 50 yuan/ton is raised.

Punched lace material is 2830-2880 yuan/ton, and the price is increased by 50 yuan/ton.

Matters needing attention in scrap iron recovery:

1, storage environment

Due to the particularity of iron materials, attention should be paid to the storage environment to avoid moisture. The suitable environment is a dry, ventilated and cool place. If possible, it is best to set up a separate warehouse for storing scrap iron to create a better environment and effectively ensure the performance of recycled scrap iron. In the outdoor environment, we can choose to build a shelter ourselves, which can also play a protective role to some extent and avoid rust and other problems caused by rainy weather.

2. Placement method

The arrangement of recycled scrap iron is also very particular. All recycled scrap iron should be classified and screened according to its characteristics, which is convenient for subsequent processing and utilization. The screened scrap iron should not be piled up casually, but in piles. It should be noted that the weight of each group of iron filings should be controlled within a suitable range and not too high. At the same time, pay attention to the place where it is placed, and avoid direct sunlight or low-lying and humid places.

3, regular inspection

Finally, the arrangement and placement of scrap iron are not all right, and it needs regular inspection. For the recycled waste materials, first of all, check whether there is dirt or pollution near the storage place and clean it up in time. Also pay attention to the order of access, follow the principle of first come first served, avoid disorder in the process of material access, and deal with iron filings that have been stored for too long in time to avoid material deterioration and waste of resources.