it depends. If there is a water leakage problem in the public sewer, it belongs to the public property of the community, and the property can apply for a maintenance fund for maintenance; If the owner's own sewer pipe leaks, the property is not responsible, and the owner should bear the corresponding maintenance responsibility.

The leakage of sewer pipes in toilets is a common phenomenon in life, which is a headache and troublesome to handle. For this phenomenon, it is necessary to find out the cause of water leakage.

If it is caused by pipeline rupture, the best way is to use glass glue to repair it. After repair, water cannot be used immediately, but it will take 24 hours. But if it is caused by the upstairs residents, it needs to be repaired.

if there is water leakage in the kitchen sewer pipe, it is also necessary to find out the cause of water leakage first and check all the pipes. If it is caused by the looseness of the interface, just tighten it directly, or wrap a cloth belt around the interface.

drainage cannot be carried out immediately after the repair, and the belt cannot be used until the next day. However, if the water still leaks after tightening, it is caused by the rupture of the pipeline, and it is necessary to replace the new pipeline, because many pipelines will be aging after being used for a long time.

Causes of sewer leakage

1. Aging or damage of sewer pipes: Sewer pipes are often aged or damaged due to disrepair or natural wear. In this case, water leakage points inside sewer pipes may increase. Factors affecting sewer pipes may include external environment, temperature changes and the location of pipes.

2. Pipeline blockage: Pipeline blockage is also one of the causes of sewer leakage. When the upstream of the leaking pipeline is blocked, the waste water accumulated in the pipeline may be full and overflow. Because the sewage pipeline is often blocked by foreign bodies, it causes water leakage.

3. Rainfall and rainstorm: The water level capacity of sewer pipes will be different under specific climatic conditions. When there is heavy rain or continuous rainfall, the water flow carried by the sewage pipeline is increasing, which leads to the increase of pressure in the pipeline and directly affects the normal discharge of sewage flow. In this case, water leakage from sewers is more likely to occur.

4. Quality problem of pipeline materials: Some low-cost materials may not meet the requirements of pipeline design and use, resulting in pipeline failure. If the pipe material used in the sewer is not suitable for the specific environment, there may be some material problems, such as aging and cracking of the pipe.