In the past, shoe covers made of plastic film were used in isolation areas and operating rooms of hospitals, which were airtight and easy to be damaged, and the upper was low, so the socks and trouser legs of medical staff could not be wrapped together for isolation, and bacteria on shoes or trouser legs were easily brought into the isolation area.
With the development of science and technology, the medical isolation shoe covers produced today are not only good in isolation, waterproof and breathable, but also high in strength. The high-tube design can put shoes and trouser legs in the isolation shoe cover, which is more comprehensive in dustproof isolation. The medical isolation shoe cover is made of non-woven PP+PE material, which has sufficient strength and barrier performance. YY/T1633-219 is used as the inspection standard for the quality inspection report of medical protective shoe covers. The main inspection items are: appearance, structure and specifications, water resistance, surface moisture resistance, breaking strength and elongation at break, filtration efficiency, ethylene oxide residue, microbial indicators, sterility, etc., for one-time use.
1. Testing standard of medical isolation shoe cover:
1. The seam should be neat, and there is no off-line and off-copy phenomenon.
2. After the high temperature test at 6℃, the high temperature resistant shoe covers should still be used normally.
3. Elasticity Elasticity Elasticity should be free, and the elongation of rubber should not be less than 5%.
4. The waterproof shoe cover should have certain waterproof performance, and there should be no dripping or water leakage after the test.
5, performance indicators The appearance surface should be clean, free of stains and dirt. The thickness should be uniform and the feel should be soft.
6. For the shoe covers formed by hot pressing, it is required that the periphery should be firmly hot-pressed, and there should be no cracks or damage.
7. Specifications The size of the shoe cover shall comply with the provisions in 1.3, with a tolerance of +5mm. The thickness of plastic film used for shoe covers shall not be less than .12mm.
2. Precautions for the use of medical isolation shoe covers:
① Please visually inspect the medical isolation shoe covers before wearing them. If they are damaged, discolored or polluted, please do not wear them.
② When using, please strictly follow the purpose and usage restrictions of the medical isolation shoe cover, and users should judge for themselves whether this product is suitable for specific occasions.
③ use with caution those who are allergic to raw materials such as nonwovens.
④ medical isolation shoe covers are disposable, and repeated use is strictly prohibited. please dispose of them according to the requirements of biosafety regulations after use.
⑤ The medical isolation shoe cover melts at 135℃. Please keep away from heat sources and open flames when using it.
⑥ the product shall not be used after its expiration date.
② It is only used by health units and emergency rescue, not in the operating room!
medical isolation shoe covers should be stored in a dry, cool and well-ventilated environment with a temperature of -3℃~55℃ and a relative humidity of no more than 8%, so as to ensure the proper performance of medical isolation shoe covers.