What are the steps to install win10 system on ROG Gunslinger S7BM8750? ROG Gunslinger S7BM8750 is a 17.3-inch gaming notebook with Windows 10 pre-installed, weighing 2.95Kg, 412mm in length and 274mm in width. The processor uses the Intel Core i78 series, the CPU is clocked at 2.2GHz, six cores/twelve threads, the memory capacity is 16GBDDR42666MHz, and the hard drive is a hybrid hard drive (SSD 5400 rpm HDD), 256GB 1TB. Equipped with NVIDIA GeForce GTX1060 enthusiast-level independent graphics card, with a memory capacity of 6GB GDDR5. Here, the editor will share with you the graphic and textual steps for reinstalling the win10 system on the ROG Gunslinger S7BM8750 using a USB disk.
1. Preparation
1. Empty U disk with 8G or larger capacity
2. Make uefipe boot disk: How to make U disk with micrope toolbox Boot disk (UEFILegacy dual mode)
3. Win10 system download: ASUS notebook ghostwin1064-bit official website download v2019.08
2. The steps to reinstall win10 from ROG Gunslinger S7BM8750 notebook U disk are as follows
1. After making the wepe boot disk, copy the downloaded win10 system iso image directly to the U disk;
2. Insert the U disk into the ROG Gunslinger S7BM8750 laptop to start. disk, keep pressing ESC after restarting, bring up the boot menu, select the recognized U disk option, usually the name of the U disk or the one with the word USB, such as UEFI: Flash, Partion1, after selecting, press the Enter key to enter;
3. After entering pe, double-click the Partition Assistant (lossless) on the desktop, select disk 1, click Quick Partition, make sure to choose the right one, and do not delete it by mistake;
4. Give ROG Set the number of partitions, partition size and partition type for the Gunshen S7BM8750 laptop. It is recommended that the system disk with the volume label be 60G or more. Since UEFI boot is selected, the disk type should be selected as GPT. After confirming that it is correct, click Start;
5. After the partitioning is completed, the GPT partition will have two ESP and MSR without drive letters. Do not touch these two partitions. Then open this computer-micro PE toolbox, right-click the win10 system iso image, and select load. If it is not loaded, right-click-open with-explorer;
6. Double-click the installation system.exe and run Install the tool and select the restore partition. The GHOWIMISO image path will be automatically extracted to win10.gho. Then select the installation location, usually the C drive, or judge based on the volume label or total size. After selecting, click OK;
7. If this prompt pops up, ignore it, click Yes and continue;
8. This dialog box pops up, select restart after completion and boot repair, click Yes;
9. Go to this interface and perform the process of installing and deploying the win10 system to the C drive. You need to wait for a while;
10. After the operation is completed, the ROG Gunslinger S7BM8750 laptop will automatically restart after 10 seconds. During the restart process, Take out the U disk, and then enter this interface to perform win10 system component installation, driver installation and activation operations;
11. Finally boot into the win10 system desktop, the process of reinstalling the win10 system on the ROG Gunslinger S7BM8750 laptop is completed. .
The steps to reinstall the win10 system using a USB flash drive on the ROG Gunslinger S7BM8750 notebook are as follows. If you need to reinstall the win10 system, you can refer to the above steps.