Step 1: First use a plastic scraper (can be replaced by discarded bank cards, IC cards and other plastic cards) from the edge of the metal characters, slowly separate the metal characters from the car body surface, and then follow the Use a plastic scraper to drip a multi-functional glue remover on all sides along the edge of the metal letter, so that it can be more quickly immersed into the adhesive layer of the metal letter from the edge. 3 Step 2: Wait for about 20 seconds for the adhesive remover to fully penetrate the double-sided tape in the adhesive layer of the metal characters. You can insert a plastic scraper between the metal characters and the surface of the car body. If the bonding is still very tight, You can increase the intensity. 4 Step 3: After the plastic scraper is inserted into the metal character adhesive layer, there will be an opening. At this time, we can drip more glue remover into the adhesive layer along the plastic scraper, so that the glue remover and The double-sided tape reacts fully, and then continue to insert the plastic scraper, and the metal words can be shoveled off soon.

Prepare a piece of thread, a bottle of glue remover or a little oil, kerosene, and gasoline. Scrape off the mark with a thread and wipe off the 3M glue with glue remover. Car logos refer to the logos of various car brands, and these logos often become representatives of automobile companies. Car signs include: car trademark or factory logo, product label, engine model and factory number, vehicle model and factory number, vehicle identification number, etc.

If it is at the front air intake grille, there are two small screws at the back that can be removed. The logo and model number on the rear of the car are usually glued on by glass glue and can be slowly peeled off. Then use a solvent such as essential oil or alcohol to wipe off the remaining glue.