Mengran DIY

2020-03-13 3976 people viewed it

Nowadays, the environment is seriously polluted. I believe that many families now have bought air purifiers. However, after using the air purifier for a period of time, I found that the blades of the purifier are very dirty, but I don’t know how to open it, and I am afraid that I will break it. So today I will teach you how to disassemble the Xiaomi purifier and clean the blades

Tools/Materials

more

Xiaomi Air Cleaner Slotted Screwdriver Phillips Screwdriver

Method/Steps

1/6 points Step by step reading

The first thing to do is to unplug the power cord, then take out the filter cartridge and wipe it. This step is relatively simple

2/6

Then we Turn the purifier over and take off the rubber buckles. Then you can see a circuit board. Use a screwdriver to unscrew the screws and then remove it.

View the remaining 2 pictures

3/6

Then there is the side panel. First use a flat-blade screwdriver to pry the back, and then carefully remove the side panel. Be careful not to use brute force here

Check out the remaining 2 pictures

4/6

Then you can see that there are 4 screws on the fan cover. After unscrewing them, unplug all the wires next to them to prevent fooling around. Designed so you don’t have to worry about forgetting how to plug it in

See the remaining 1 picture

5/6

Then remove the fan cover, unscrew the screws, and remove the circuit board Just take off the fan blades

View the remaining 3 pictures

6/6

Then remove the fan blades with water or detergent Come clean, after cleaning and drying, just follow the previous steps and put it back again

View the remaining 1 picture

Summary

1/1

1 Unplug the power cord and wipe the filter cartridge

2 Turn the purifier over, remove the rubber buckle, unscrew the screws and remove the circuit board

3 Use a screwdriver to pry off the back of the side panel, and then remove it

4 Unscrew the fan cover screws, and then unplug all the wires next to it

5 Remove the fan cover and unscrew the screws , remove the circuit board and remove the fan blades

6 Finally clean the fan blades

Notes

Remember to pry from the back first before opening the back panel , avoid using brute force