First of all, it must be the registered manufacturer Chuck has the right to produce.

* Must have a trademark (factory name, address, trade name recognized by the manufacturer, production batch number ```).

Second: if there is a branch factory,

* It is necessary to indicate the main factory and sub-site where the goods are produced.

Third, the National Health Bureau has promulgated a series of laws requiring production, among which there are different production standards for different commodities.

* There must be on-site production standards.

Fourth: every commodity must pass the inspection of the National Health Bureau, and only when it is qualified can it be given a full certificate, numbered "verifiable"

Mimeographed certificate

Fifth, there must be the inspector's seal and number.

Sixth: List the materials used in production.

Seventh: the function and efficacy of the commodity.

Eighth: the use and quantity of the commodity.

Ninth: Applicable people

Tenth: Date of production

Eleventh: the manufacturer's production number

Other labels are customized by the manufacturer.

What does the product standard number mean?

Product standards are technical specifications for products. In China, there are four technical specifications of products: national standards, industry standards, local standards and enterprise standards.

According to the Standardization Law of People's Republic of China (PRC), there are corresponding national standards, and enterprises should follow them; Where there is no national standard, the enterprise may implement the enterprise standard or local standard.

Each product standard will correspond to a number, which is the product standard number.

According to the law, what requirements must product packaging meet?

Product packaging refers to packaging containers, materials and auxiliary materials in the process of product transportation, storage and sales, and attaching relevant signs to the packaging in order to protect products, facilitate storage and transportation and promote sales. Product packaging can also refer to business activities to achieve the above objectives.

What is the national new three guarantees regulation?

National New Three Guarantees Regulations

-Household appliances and other commodities

Article 1 In order to protect the legitimate rights and interests of consumers and clarify the responsibilities and obligations of sellers, repairers and producers for repairing, replacing and returning some commodities (hereinafter referred to as Three Guarantees), these Provisions are formulated in accordance with the Product Quality Law of People's Republic of China (PRC), the Law of People's Republic of China (PRC) on the Protection of Consumers' Rights and Interests and relevant regulations.

Article 2 The term "some commodities" as mentioned in these Provisions refers to the products listed in the Catalogue of Some Commodities Subject to Three Guarantees (hereinafter referred to as the Catalogue). The catalogue shall be formulated and adjusted by the product quality supervision and management department of the State Council in conjunction with the competent industrial and commercial department, and issued by the product quality supervision and management department of the State Council.

Article 3 The principle of "three guarantees" shall be applied to the products listed in the catalogue. The contracts concluded between the seller and the producer, the seller and the supplier, and the seller and the repairer shall not be exempted from the three guarantees responsibilities and obligations stipulated in these regulations.

Article 4 The indicators specified in the Catalogue are the most basic requirements for fulfilling the Three Guarantees. The state encourages sellers and producers.

Article 5 Detailed rules for the implementation of Three Guarantees, which are stricter than these provisions, shall be formulated. This provision does not exempt the three guarantees of products not listed in the catalogue and the responsibilities promised by sellers and producers to consumers that are higher than the three guarantees of products listed in the catalogue.

Article 6 A seller shall perform the following obligations:

(a) can not guarantee the implementation of the three guarantees, and shall not sell the products listed in the catalogue;

(two) to maintain the quality of products sold;

(three) the implementation of the incoming inspection and acceptance system, does not meet the statutory identification requirements, are not allowed to sell;

(4) When the product is sold, it should be checked out of the box, correctly debugged, introduced the maintenance items, the three-guarantee method and the repair unit, and provided with valid invoices and three-guarantee certificates.

(five) properly handle consumer inquiries and complaints, and provide services.

(6) The repairer shall perform the following obligations:

(a) to undertake maintenance services; Maintain the reputation of sellers and producers, and do not use parts that do not meet the technical requirements of products. Seriously record the faults and the quality of the repaired products to ensure that the repaired products can be used normally for more than 30 days; (three) to ensure that the repair costs and repair parts are all used for repair. Accept the supervision and inspection of sellers and producers; (four) to bear the responsibility and loss caused by the repair error; (five) to accept consumer inquiries about the quality of product repair.

Article 7 Producers shall perform the following obligations:

(a) clear three guarantees. If a production enterprise establishes or designates a repair unit by itself, it must provide consumers with a three-guarantee certificate, a list of repair units, addresses and contact numbers. ; (two) to provide repair technical information and qualified repair parts to the sellers and repairers responsible for repair, and to be responsible for training and providing repair expenses. Ensure that spare parts that meet the technical requirements will continue to be provided within 5 years after the product is discontinued; (three) properly handle the direct or indirect inquiries of consumers and provide services.

Article 8 The validity period of the Three Guarantees shall be counted from the date when the invoice is issued, after deducting the time occupied by the repair and no spare parts to be repaired. Within the validity period of the Three Guarantees, the consumer shall handle the repair, replacement and return with the invoice and the Three Guarantees certificate.

Article 9 If the performance of a product is unqualified within 7 days from the date of sale, consumers can choose to return it, exchange it or repair it. When returning goods, the seller shall refund the payment in one lump sum according to the invoice price, and then claim compensation from the producer or supplier according to law or deal with it according to the purchase and sale contract.

Article 10 If the performance of a product is unqualified within 0/5 days from the date of sale, consumers can choose to exchange it or repair it. When exchanging goods, the seller shall exchange products of the same model and specification for consumers free of charge, and then claim compensation from the producers and suppliers according to law or deal with them according to the purchase and sale contract.

Article 11 The seller shall be responsible for replacing the products of the same model and specification for consumers free of charge or returning them in accordance with the provisions of Article 13 of these Provisions, and then claim compensation from the producers and suppliers according to law or deal with them according to the purchase and sale contract.

Article 12 If the manufacturer fails to provide spare parts within the validity period of the Three Guarantees, and it has not been repaired for more than 90 days since the date of repair, the repairer shall indicate in the repair status, and the seller shall replace the products of the same model and specification for consumers free of charge accordingly. Then claim compensation from producers and suppliers according to law or deal with it according to the purchase and sale contract. If the repair period exceeds 30 days due to the repairer's own reasons, the same model and specification products will be replaced for consumers free of charge. The cost is borne by the repairer.

Article 13. If, within the validity period of the Three Guarantees, it meets the exchange conditions, the seller requests to return the goods because there are no products of the same model and specification, and the consumer is unwilling to exchange products of other models and specifications, the seller shall return the goods; have ......

What is the concept of product execution standard?

Products need to be produced and inspected according to the requirements of the implementation standards, which generally stipulate the terms and definitions, technical requirements, test methods, inspection rules and marks, labels, packaging, transportation and storage of products. The implementation standards can be national standards, industry standards, local standards or enterprise standards.

What is the standard of product distribution?

Engineering cost accounting is generally determined according to the contents of the engineering contract, the characteristics of construction production, the occurrence of production expenses and management requirements.

The distribution standard is: the construction project is based on direct cost, the installation project is based on labor cost, and the distribution of products (services and operations) is based on direct cost or labor cost.

What requirements should the logo on the product or its packaging meet?

The so-called product quality inspection certificate refers to the certificate issued by the producer to prove that the product quality meets the corresponding requirements. Certificate of conformity includes certificate of conformity, seal of conformity and other forms. The project content of the certificate is decided by the enterprise itself. The certificate generally indicates the inspector or his code, inspection, production date and other matters. Some products that are inconvenient to wear certificates can be identified by certificates. The product quality inspection certificate can only be used for products that have passed the inspection, and products that have not been inspected or failed the inspection shall not be used. The inspection of ex-factory products is generally carried out by the inspection department set up by the production itself. Enterprises that do not have the testing ability and conditions may entrust social product quality inspection institutions to conduct inspection. 2. Product name, manufacturer's name and address shall be indicated in Chinese. The so-called annotation in Chinese means annotation in Chinese characters. If necessary, Chinese national characters can also be attached. Product name is a literal language mark that distinguishes this product from other products. The product name can generally reflect the most prominent features such as the use, characteristics and main components of the product. The name and address of the production enterprise are the name and title of the enterprise that produces the product and the actual address where the main production and business premises of the enterprise are located, which is a language symbol that distinguishes an enterprise from other enterprises. The name and address of the enterprise have been determined when handling the business license, and the name and address of the product manufacturing enterprise shall be consistent with the name and address stated in the business license. At the same time, enterprises also abide by the principle of good faith in market economy activities, which helps consumers choose and identify products and sources and safeguard their legitimate rights and interests. 3. According to the characteristics and use requirements of the product, mark the product identification. This is the requirement stipulated in Item 3, Paragraph 1, Article 27 of this Law. This clause is a general clause and an obligation that producers should perform. Identification of product specification, grade, composition, content, etc. Identification should be made according to the different characteristics and different use requirements of different products. Where laws, regulations, rules or other normative documents require the above contents to be indicated, the producer shall indicate them. If it is necessary to inform consumers in advance, it shall be marked on the outer packaging or relevant information shall be provided to consumers in advance. The above provisions of the law must be observed. For example, the state has formulated mandatory standards for food labeling, and producers should fulfill their product labeling obligations as stipulated by law. For the labeling of some products that can be classified and standardized, the state can formulate corresponding laws and regulations to clearly stipulate the labeling requirements of each type of products. Used in durable consumer goods such as color TV, air conditioner and refrigerator. The price is generally high and the operation is complicated. These products should be marked with the maintenance methods of the products and accompanied by Chinese instructions. 4. Identification requirements for limited-time use products. That is, products that are used within a time limit shall be clearly marked with the production date, safe use period or expiration date in a prominent position. The so-called limited use products refer to products with a certain service life and can guarantee the product quality within this period. For example, food, medicines, pesticides, fertilizers, cement, cosmetics, beverages and other products must have a certain service life. The so-called safe use period generally refers to the period to ensure product quality. Safe use period includes shelf life, storage period, validity period and fresh-keeping period. Shelf life refers to the effective period of keeping the product quality in line with the specified requirements at any time. Shelf life refers to the longest shelf life of a product, during which it is guaranteed that the product will not fail or deteriorate. It should be noted that the shelf life and shelf life of products are different. At the end of the warranty period, the inherent quality of the product may not be able to maintain the original quality. The product has exceeded the shelf life and is generally not suitable for further use. Validity refers to the period during which the product maintains its original validity and function. Generally, the efficacy and function of products beyond the expiration date are obviously reduced or lost. Fresh-keeping period refers to the period during which products are preserved. Products that have passed the shelf life can still be used, but they are not fresh within the shelf life. For restricted products, there are two ways to mark them: one is to mark the production date and the safe use period, both of which are indispensable. Another method is to only indicate the expiration date, and labels such as production date, shelf life and shelf life can be omitted. It should be emphasized that products with limited use time should be clearly marked with production date, safe use period or expiration date in a prominent position. The so-called prominent position refers to the obvious position that is easy to be found. The so-called clarity refers to the degree to which ordinary people can clearly identify. In reality, some producers deliberately mark the above date in a position that is not easy to find, or deliberately mark it. ......

The product includes: implementing standards; What did QJ do ... mean?

First of all, let me tell you that these are not English letters, but Chinese phonetic letters. It is the code name for the implementation of standards by manufacturing enterprises. According to China's national standards management measures, industry standards management measures, local standards management measures and enterprise standards management measures, the standard code is named after the first letter of Chinese Pinyin. For example, the national standard code is GB (the initials of national and standard Chinese characters), the industry standard code is NY, and the local standard code is DB (the initials of landmark). Secondly, the first two places of the provincial administrative division codes, such as DB6 1 in Shaanxi, are followed by the letter q of "enterprise" in front of the manufacturer's enterprise standard, followed by the Chinese pinyin abbreviation letter q of the enterprise, such as the enterprise standard code of Tongchuan Boiler Factory is Q/TG, and the number behind the standard is the standard sequence number first, and finally the year number of the standard release. I wonder if I can meet your needs?

What is the enterprise product standard code?

It is the code name of enterprise product execution standard. For details, please click: hi.baidu/jx985.