In order to prevent everyone from being fooled by super-fine imitation shoes that look just like the real thing, I would like to share with you how to identify the authenticity of the latest 2011 Converse shoes. The editor briefly summarizes, first check whether the glue used in the shoes is environmentally friendly glue. The glue smell is relatively light, and the glue content of genuine shoes is 51. The shoes are relatively heavy because they are made of enough materials. You can tell by weighing them in your hands; and then It can be seen that thread fibers, double side strips, virgin rubber and fine mesh are added to the sole edge strips; the cotton content of genuine shoelaces is very high and very elastic. Let me tell you in detail below. Picture 21. Shoe box CONVERSE shoe box is made of one-piece corrugated paper (so-called one-piece type: the disassembled shoe box is printed from a piece of paper and is not disassembled and assembled). The printing is clear without ghosting, the color is bright, and the paper is thick and hard. The CONVERSE shoe box changes appearance every year. 2. Moisture-proof paper A pair of genuine products from specialty stores that have undergone strict inspection must have a piece of translucent moisture-proof paper (copy paper) with the word "CONVERSE" printed all over it. It can wrap two shoes and effectively prevent moisture and absorb moisture. Generally, pirated shoes do not pay attention to these, and only put a piece of cheap ordinary white paper. 3. Desiccant There is a desiccant in the converse shoe box. The words "CONVERSE desiccant cannot be eaten" are printed on the desiccant in clear fonts. Generally, pirated shoe dealers will not pay attention to these details. Friends who like Converse should not miss these details ~ 4. Hangtags CONVERSE will replace different hangtags from time to time. These hangtags will use different paper and different craftsmanship, leaving those counterfeiters far behind. Picture 35. Sole The reason why Converse brand shoes have been selling well for hundreds of years is not only because of their novel styles and endless styles, they are often the most popular necessary equipment for young people. CONVERSE's shoes are made of sufficient materials. A pair of genuine Converse shoes will be relatively heavy, but the sole is the sole. Even a pair of canvas shoes is quite heavy, especially if they are CONVERSE cowhide shoes. The basic anti-counterfeiting mark is the raised "CONVERSE ☆ ALL STAR" LOGO mark in the middle of the sole. There is a six-pointed star* next to the logo, and the registered trademark ?0?3 next to the star. However, with the emergence of high-end imitation goods, this has become It was imitated by unscrupulous merchants. Converse's soles are made of disposable virgin rubber. The soles are strong and elastic. Even if they are worn for a long time, the soles will not wear out easily. Converse's shoes are glued with natural environmentally friendly glue, so the glue may open if worn for a long time or incorrectly. The materials used in the fakes are obviously different. Some copycat factories use recycled secondary glue and tertiary glue. The soles are harder and lighter than the original ones, and have no elasticity. They will break after being worn for a while. The rubber pads inside the shoes are of poor quality and are easily deformed. ,smell. The "CONVERSE" logo on the inside of the shoes is plain or dark blue. The paint is relatively strong and cannot be easily scraped off by hand; counterfeit products are easy to fall off. Picture 46. The shoe body of CONVERSE shoes is mainly made of canvas, cowhide and PU. Canvas shoes are made of canvas or fine mesh with the highest density and best texture, which are durable; cowhide is made of high-quality cow head leather, which is smooth, high-quality, durable, and easy to care for. Basketball shoes and casual shoes are made of imported PU, which is waterproof. In order to save costs, fine imitations use domestically produced low-quality PU, which has a pungent and unpleasant leather smell and is prone to breakage. CONVERSE is also one of the few brands in the shoe category that does not contain the harmful chemical ingredient formaldehyde. 7. Converse shoes with low tongues have the words "ALL☆STAR" sewn on the outside of the tongues, and different styles have the same color; high-bonded shoes do not have such a LOGO. Domestically produced Converse shoes will have English product descriptions printed on the inside of the tongue: "YEU CHENG(KUNSHAN)STRORS CO. LED." etc. Picture 88. Small anti-counterfeiting label (important) Authentic shoes from CONVERSE stores will have a small anti-counterfeiting label sewn on the innermost part of the shoe, that is, the innermost part of the shoe tongue, which is the CONVERSE logo or a star. graphics.
9. "TM" on the heel of shoes is common in foreign trademarks. It is the abbreviation of "trade mark" in English. "Trade mark" in Chinese means "commercial mark", so "TM" means "trademark", and its function is Tell people that the graphic or text marked on it is a trademark of the product or service, not a name or an advertisement. -