Before removing the logo sticker from the front windshield, you can soak the logo with a hot towel. When it is soaked, some logo stickers can be easily torn off. If there is no solar film on the front windshield, you can use a special cleaning solution, such as asphalt cleaner, to remove the logo with long time and strong adhesion. Without these scavengers, you can also soak in soapy water or washing powder water, which can also achieve the effect of thorough removal.

If there is a solar film on the front windshield, you can wipe it repeatedly at the logo with a towel dipped in a small amount of alcohol, but you must never spray it directly on the glass, otherwise it will damage the car film. No matter whether there is a solar film on the front windshield, you can't use sharp tools such as blades to uncover the label, otherwise you will scratch the glass or solar film. Various bank cards, membership cards and telephone cards are good tools.

2. Physical removal method

The method of physical cleaning is actually very simple. Almost every family has a tool, that is, a hair dryer for haircut. If possible, use a long patch panel to lead the power to the outside, plug in a hair dryer, and heat the label back and forth with hot air. In a short time, various labels and stickers can be easily removed.

Step 3: Once and for all

At present, there are tools for sticking logo stickers on the market, such as electrostatic stickers or sucker stickers. Electrostatic stickers are not expensive, similar to protective stickers that protect the screen of mobile phones, but slightly larger than logo stickers. The owner can stick the car logo on the electrostatic sticker first, and then stick the electrostatic sticker on the front windshield, which is very firm and will not stick to the front windshield when it is removed.

Electrostatic stickers are disposable, and sucker stickers can be used repeatedly. Sucker stickers are similar to ultra-thin photo frames. Put the logo sticker in it, and then stick a sucker on it and fix it on the front windshield. These two tools are easy to install and carry. Although the electrostatic sticker can't be recycled, it looks better than the recyclable sucker sticker.

Extended data:

Cancelled inspection mark:

1, cancel the insurance sign

Beijing, Shenzhen and other regions have taken the lead in implementing electronic insurance policies. For the electronic insurance policy purchased by the owner, the traffic police can check whether the insurance is purchased by networking, and there is no need to post an insurance sign on the window. Of course, this policy has achieved good results in the pilot areas, and I believe it will be extended to the whole country soon. If you drive to other parts of Beijing and Shenzhen, you still have to post the sign of compulsory insurance, otherwise you will be fined.

2. Cancel the environmental protection sign

For environmental protection signs, in fact, the whole country canceled many years ago. Of course, there are also many car owners who think that the environmental protection sign has been cancelled and that exhaust gas testing is no longer necessary. In fact, the environmental protection mark is covered by the annual inspection mark, which means that the exhaust gas is unqualified and the annual inspection mark will not be applied, so the cancellation of the environmental protection mark only means that one less piece of paper is posted.

3. Keep the annual inspection mark.

It should be noted that although the green environmental protection sign has been cancelled, the exhaust gas detection is still the same as before. The cycle of motor vehicle exhaust inspection is consistent with the cycle of motor vehicle annual inspection. Vehicles that enjoy the six-year exemption policy still need to get the annual inspection mark every two years because the environmental protection mark is cancelled.

Baidu encyclopedia-electrostatic sticker

Baidu Encyclopedia-Vehicle Inspection Sign Sticker