The label on the plate can be baked in an ordinary heater for a few minutes, and then it can be removed. You can also use a hair dryer to heat it slowly at home and then tear it off. Or drop a few drops of cooking oil, soak it, take it out, and then use a toothbrush to remove the residue. It can also be removed by rubbing it on the wall with white ash or eraser.

Method for removing label from board

1. In winter, bake the plate on the heater for a few minutes, and then tear off the label after there is heat at the label. You can also use a hair dryer to slowly heat the label and then tear it off. Their principle is to use glue to heat and dissolve, and hot water to remove it has the same effect.

2. Drop the edible oil on the label and tear it off after the oil completely soaks the label. Because oil is a hydrocarbon, it is soluble in resin. If there is residue, you can brush off the rest with an old toothbrush. When using oil, be careful to slip your hands to avoid dropping the plate.

3. Tear off the label directly first, then sprinkle the white ash on the wall on the rest of the label, wipe it with a rag, or wipe it with an eraser, and the same effect can be achieved. Both methods will be a little dirty at first, and finally wash the residue with water.