Product description:
Semi-automatic desktop vacuum capping machine, a semi-automatic model (manual capping, manual entry and exit of bottles). Using pneumatic drive capping, the semi-automatic desktop vacuum capping machine uses precise control of the air pressure of the actuator to achieve torque control, and non-friction torque limitation makes the service life longer; due to the use of reliable full sealing technology, the ideal vacuum pump can be configured with a low-power vacuum pump Vacuum degree, the vacuum degree can be set as needed. The semi-automatic desktop vacuum capping machine is economical, widely applicable, easy to use, reliable and mobile, and is suitable for small production workshops, special specifications, and laboratory use.
Applicable products: All products with glass screw-top bottle caps and standard tinplate claw-type screw-open caps, such as condiments, canned aquatic products, canned fruits, canned vegetables, soy products... .etc.
Especially canned products that require reliable vacuum packaging and high-temperature and high-pressure sterilization.
Main parameters:
Applicable bottle type range: bottle diameter 40~110 mm, bottle height 55~180 mm.
Applicable cap type range: standard tinplate claw-type twist-open cap 38~82 mm
Production capacity reference: 600 bottles per hour actual test
Vacuum degree: the highest -0.09Mpa adjustable
Dimensions: 350 mm wide, 790 mm high, 460 mm deep. (Base size not included)
Host power supply: AC 220V
Host power consumption: less than 100 watts
Friendly reminder: Recommended configuration of semi-automatic desktop vacuum capping machine Vacuum pump model: 2X-8A (two-stage rotary vane vacuum pump, nozzle connection type, motor 1.1 kilowatt, displacement 8 liters per second, ultimate vacuum -0.096Mpa) Handheld electric capping machine
Technical parameters
Capping speed: about 25 bottles/minute Net weight of host: 0.6kg/1.1kg Voltage: 220V 50/60Hz Clutch: Torque adjustable capping range: 28-43mm Note: small 20-33mm, medium 28-43mm, larger 30-50mm are optional (only one comes with the machine) Power supply size: 125×80×60mm Host: 60×60×300mm
Product introduction 1. This model of capping machine is mainly used For unscrewing or tightening various threaded caps. 2. The handheld electric capping machine is easy to carry and can be conveniently used to tighten or loosen various bottle caps. 3. Its adjustable clutch can effectively avoid damage to the bottle cap and reduce wear of the inner plug.
Hand-held pneumatic capping machine
Main uses: This model of capping machine is mainly used for unscrewing or tightening various threaded caps.
Technical parameters
Capping range: 5-30mm30-90mm
Capping speed: about 30 bottles/minute
Net weight of host : 0.6kg/1.1kg
Air pressure: greater than 4.5kg/cm2, less than 6.2kg/cm2
Air consumption: 0.08m3/min
Quick connector: 1/4 inch
Clutch: adjustable
Principle and features: The handheld pneumatic capping machine is widely suitable for unscrewing or tightening any threaded cap. It has a wide capping range. The screw cap is not limited by the height, shape, size and weight of the bottle. It can unscrew and unscrew the cap. It is easy to operate, has low failure rate and low price. It is the best tool for tightening threaded caps. It is especially suitable for use when the bottles are taller, larger, heavier or have weird shapes, or when the caps have many specifications and the capping head needs to be replaced frequently. Desktop electric capping machine
Product introduction:
This machine is suitable for capping and tightening screw-threaded flat-head plastic caps, such as: lubricating oil barrels, mineral water bottles, medicine bottles, and daily chemical products , beverage bottles, etc.; suitable capping heads can be customized for bottle caps with special specifications. We will do our best to meet the different needs of different customers.
Technical parameters
Power supply voltage: AC220V 50HZ
Power: 50W
Working efficiency: about 1200 bottles/hour
Bottle cap diameter: Φ10mm-Φ50mm
Applicable bottle height: 40mm-200mm
Host net weight: 32Kg
Host appearance: 520×300×530m
Desktop pneumatic capping machine
Product introduction:
This machine is the latest new capping equipment produced by our company, and the accessories used are all domestically produced. Manufactured by manufacturers, the equipment has more stable performance, higher working efficiency and longer service life.
Technical parameters
Power supply voltage: AC220V±10 50HZ
Power: 25W
Bottle cap diameter: Φ10~Φ50MM
Capping speed: 20~40 times/min
Applicable bottle height: 40~200MM
Air source pressure: 1~5Kgf/cm2 (gas source prepared)
Air consumption: 0.03m3/min
Net weight: 30Kg
Shape: 520×300×530mm