Because I haven’t mastered the methods and techniques.

1. Determine whether the claw machine is black or not

Generally speaking, there are several types of claw machines in the shopping mall, normal machines & black machines (count machines, weak claw machines) .

The claws can hold the doll straight up and down, and then the claws will automatically release when it reaches the highest point. If the doll falls back to the original place, this kind of claw is a normal claw, also called a conscience machine.

So, when you go to a new place to clamp a doll, you have to spend 1 to 2 coins to test whether the claw machine has been tampered with. Otherwise, you will suffer a big loss if you encounter a weak claw machine and a counting machine.

Let’s talk about the weak claw machine and the counting machine. Generally, the machine is used to clamp large dolls (not necessarily big, but those with a lot of coins). The weak claw machine is very common. It is not recommended for novices to try the weak claw machine. . Not to mention the cost of coins, if you don’t know the claw swing skill, forget it.

Once again, if the claws can be lifted straight up and down, and the claws can be automatically released when the claws reach the top, it is definitely not a black machine, but a normal machine.

2. The claw determines 50 lives

Tightness of the claws: The claws are divided into tightness and tightness. After inserting the coin, press the move key, the claws will be very loose. If you move a little, The claws are shaking so much that it’s probably time to give up at this point.

If you move the joystick and the claw still looks straight, congratulations, you may have encountered a powerful claw. With practice, you can adjust the distribution of the three claws of the claws by constantly shaking the joystick and the lower claws will easily form a large angle. The larger the angle, the greater the inertia caused by the throwing force when lifting the claws. The bigger it is, I won’t say much here.

Rotating claws: There are many claw machines that have claws that rotate when they fall. Therefore, before grabbing, you must clearly see the direction of its rotation, which directly determines whether you can grasp the center of gravity. There is also a secret that only a few people know. Some rockers rotate the circle above to change the direction of the claws

The strength of the claws: there is no absolute in the so-called strength of the claws. The claws of each claw machine will have strong claws and weak claws, but the odds of the machines are set differently.

The odds of the machine are controlled by voltage and can be controlled internally or remotely. The only thing we can judge by ourselves is to choose a lighter doll, a doll with an even center of gravity, and a doll machine with an expensive coin amount (expensive for a reason). The reason is to allow the claws to bear less force, evenly bear the doll's gravity, and obtain a higher number of strong claws.

3. Find the center of gravity when choosing the target doll

The center of gravity must be the prerequisite for catching the doll, but it is not absolute. How to find the center of gravity? Use your own hands (like a claw machine) to grab any object around you, lift it up, and feel it.

Pinch the neck and body but not the head, or if the buttocks are big, don’t pinch the buttocks, and if the head is big, don’t pinch the head. For humanoid dolls, the best lower paw position is when the doll's arms and body are clamped with the paws. This is the perfect lower paw position. Nothing is absolute, and it does not necessarily mean that the chuck is wrong. On the contrary, sometimes it is necessary to raise the paw to adjust the position, etc.