When the bending machine is working, the coil is mainly energized by the wire. After the electricity is energized, it generates gravitational force on the pressure plate, thereby realizing the clamping of the thin plate between the pressure plate and the base, thereby meeting the needs of various workpieces.

It can be seen from this that only when the various components of the bending machine cooperate with each other can it work better.

The various components of the bending machine include the synchronization system, the slider part, the stopper mechanism and the workbench part, etc. The synchronization system here is composed of torsion shaft, swing arm, joint bearing and other parts. The overall The structure is simple, the performance is stable and reliable, and the synchronization accuracy is high.

Since the bending machine uses hydraulic transmission, its slider part consists of a slider, an oil cylinder and a mechanical stop fine-tuning structure; the left and right oil cylinders of the bending machine are fixed on the frame, and are driven by hydraulic pressure. The piston drives the slider to move up and down, and the mechanical stop is controlled and adjusted by the CNC system.

The stopper of the bending machine is driven by a motor, and the two screw rods are driven to move synchronously through a chain operation, and the numerical control system controls the size of the stopper.

Its workbench part is controlled by a button box, so that the motor of the bending machine drives the stopper frame to move forward and backward, and the moving distance is controlled by the CNC system. The coordination of various components of the bending machine comprehensively improves the efficiency, accuracy, maintainability, versatility and safety of the system, reduces manufacturing materials, and is very convenient to use. Therefore, in daily use, we must pay more attention to all aspects of the bending machine.