Question 1: What are the materials of general mineral water bottles? Bottles include refreshing beverage bottles, mineral water bottles, liquid food bottles, cosmetic bottles, etc. The materials used include polyethylene (PE), polyvinyl chloride (PVC), polyethylene terephthalate (polyester) ( PET) etc.

Usually mineral water bottles are made of PVC or PET,

Carbonated drink bottles are made of PET,

Refreshing drink bottles and liquid food bottles are made of PVC or PE,

Question 2: What material are the mineral water bottles we usually use made of? ① Polyvinyl chloride (PVC)

? It is the largest plastic used in construction. The density of rigid polyvinyl chloride is 1.38~1.43g/cm3. It has high mechanical strength and good chemical stability. Its operating temperature range is generally between -15~55℃. It is suitable for manufacturing plastic doors and windows, sewer pipes, wire ducts, etc.

②Polyethylene (PE)

Polyethylene plastic is mainly used in construction for water supply and drainage pipes and sanitary ware.

③Polypropylene (PP)

?The density of polypropylene is the smallest among all plastics, about 0.90. Polypropylene is commonly used to produce construction products such as pipes and sanitary ware.

④Polystyrene (PS)

?Polystyrene is a colorless, transparent, glass-like plastic. Polystyrene is mainly used in construction to produce foam insulation materials, light-transmitting materials and other products.

⑤ABS plastic

To briefly explain, PE material has good transparency and is cheap, but it is not strong enough. The film strength of PVC is very good but its transparency is too poor. The one you are looking for may be the PS series, but the price should be a bit more expensive.

Question 3: What material are mineral water bottles made of? Most of the PET manufacturers like Wahaha Master Kong buy preforms and blow them by themselves. The price of preforms is bought by the ton. If you buy a few thousand pieces, you can only find the spot. The mold opening cost is too high. A better mold can cost 5 pieces per set. Around 10,000, this is just a rough estimate, it depends on the complexity of your bottle!

Question 4: What material is the mineral water bottle made of, what material is the bottle cap made of, and what is the trademark? Mineral water bottles are generally PET and the cap is PE. The trademark paper is pp or pvc. How to deal with waste materials? "Bianbao.com" understands;

Question 5: What is the material of mineral water bottle trademark paper? Mineral water bottle trademark paper is a composite material. Due to different manufacturers and different regions, the materials used are also different, mainly pp, and pvc , if the processing needs to use the mineral water bottle label paper removal machine, automatic crusher, and sorting machine produced by Huasu Feiyang Plastic Machinery to meet customer requirements, and the output is 3.5 tons per shift, the profit will be considerable,

Question 6: What are the stickers on Jingtian and Baisuishan mineral water bottles made of? 5 points polyvinyl chloride

Question 7: What material is the mineral water bottle made of? Mineral water bottles are made of either PET or PVC. Generally, PVC is used more

Softness and hardness are only relative to thickness. Taking a 500ml bottle as an example, as long as the water in the bottle is not easily squeezed out when the bottle cap is opened, it is considered qualified. But pay attention to the bottle body. Those with color difference, impure color, impurities or black spots are generally recycled materials.

Question 8: What materials are used to make mineral water bottles? Mineral water bottles are either made of PET or 2VC. Generally, PVC is used more often. The softness and hardness of the bottle are only relative to the thickness. Taking the 500ml bottle as an example, as long as the bottle cap is unscrewed, it will not If it is easy to squeeze the water out of the bottle, it is considered qualified. However, you should pay attention to the bottle body. Those with overall color difference, impure color, impurities or black spots are generally recycled materials.

Question 9: What material is the label on the mineral water bottle made of? What machine was used to print it? Hello, the mineral water bottle is made of PET material: good transparency; surface gloss; high safety.

The trademark label is made of BOOP material and is printed in large quantities in the packaging factory.

However, Rihai labels are printed during the product production process. There are two types: ink printing and laser printing.

The brands I know so far, such as Yibao mineral water, use both ink and laser.

Benefits: 1. Record the production time of the product

2. Increase the added value of the product

3. Prevent counterfeiting

4. Reflect the company's overall strength and competitiveness

Question 10: What plastic material is used for mineral water bottles? etc.