1. Pay attention to the water absorption rate of ceramic tiles

The water absorption rate reflects the density of the ceramic tiles, and indirectly also reflects the hardness of the ceramic tiles. However, one thing to note is that ceramic tiles are not It’s not that the lower the water absorption rate, the better. The water absorption test here is for the tiles in the living room, bedroom, walkway and other areas. Just think about it, if the tiles in these places absorb water, wouldn't the entire area become wet? Okay, that's not appropriate. Chi, let’s pour water on the front and back of the ceramic tile first, and carefully observe the water penetration. If you buy polished tiles, the water will be sucked in immediately. Congratulations, you have encountered inferior polished tiles.

2. Observe the flatness of ceramic tiles

Many customers will specifically ask customer service about the flatness when preparing to buy ceramic tiles, reflecting that they have bought uneven ceramic tiles on the market. ; Some customers didn’t know how to judge the flatness and found out after laying uneven tiles, so they had to buy a new batch of tiles. In fact, there are two reasons why the surface of ceramic tiles is uneven after they are laid. One is that the decoration master is not skilled enough; the other is the quality of the ceramic tiles themselves. Before the ceramic tiles are laid, it is recommended that you first check the flatness of the surface of the ceramic tiles. After confirming that it is correct, then ask the decoration master to start work. This can not only avoid aesthetic problems caused by problems with the ceramic tiles, but also prevent the master from ruining his own craftsmanship. The problem was blamed on the tiles.

3. Test the corners of ceramic tiles

As mentioned in the previous step, the surface of the ceramic tiles determines whether the paving effect is smooth, and the purpose of testing the straightness of the corners of the ceramic tiles is to Check whether the overall tiles are laid neatly and whether the gaps are of the same size. At this time, we picked up several tiles and laid them on the flat ground together, paying attention to whether the gaps between the tiles were consistent, and whether the corners of the tiles could be pieced together without much interference. If the straightness of the edges is irregular, the laid tiles will be uneven, which will greatly affect the overall paving effect. Everyone should pay attention to it.

4. Experiment with the stain resistance of ceramic tiles

This step mainly examines the stain resistance of ceramic tiles. You must know that ceramic tiles will accompany our lives for a long time. , if it is not easy to clean when it is dirty, it is estimated that within three or four years, even I will not want to stay in a dirty home, I can't wait to lift these tiles and re-pave them immediately. In fact, it is very simple to do this anti-fouling test. You only need to write the words "Visit here" on the surface of the ceramic tile. Wait for the ink to dry and see if it is easy to clean. If there are ink marks left, it is recommended that you use another place. Choose a good one.

5. Testing the wear resistance of ceramic tiles

Nowadays, ceramic tiles have undergone a series of innovations in wear resistance, whether they are polished tiles, microcrystalline stone, fully polished glazed, or antique. Bricks and the like have made a qualitative leap, so to initially judge whether the surface is wear-resistant, we only need to pick up the sharp knife in our hands and scrape the surface of the tiles to see if the glaze layer on the surface of the tiles will be scraped off. If you can't bear even such a small scratch, it can be concluded that this ceramic tile is not a good partner that can accompany us for a long time.