1. Top Ten Bathrooms in China
1, Wrigley Sanitary Ware (brand of Lehua Ceramic Sanitary Ware Company, brand of China, national inspection-free product)
2.HHSN is brilliant (China's top ten sanitary ware brands, China's well-known trademarks, and China's top ten leading enterprises in low-carbon building materials).
3. Hengjie Sanitary Ware (China well-known trademark, China brand, national inspection-free products)
4. Huasheng Sanitary Ware (China well-known trademark, China fashion sanitary ware leader)
5. Langjing Sanitary Ware (China's Top Ten Sanitary Ware Brands, Quality Integrity Unit)
6. Huida Sanitary Ware (China well-known trademark, China brand, national inspection-free product)
7. Siwei Sanitary Ware (China brand products and China 500 most valuable brands)
8. Sungo Sanitary Ware (Top Ten Sanitary Ware Brands in China)
9. Shangci Sanitary Ware (home brand, China brand)
10, Xinzhongyuan Sanitary Ware (Top 500 Asian brands, environmental protection products in China)
Second, how to use China bathroom products?
1. When using any kind of faucet products, you don't need to use too much force when opening and closing, just twist or poke it gently. For products equipped with hoses, care should be taken to keep the hoses naturally stretched to avoid breakage.
2. The metal hose of the bathtub faucet shower head should be stretched naturally, and it should not be coiled on the faucet when not in use. At the same time, whether it is used or not, be careful not to form a dead angle at the joint between the hose and the valve body, so as to avoid the hose being broken or damaged.
3. The spiral rubber nozzle is not completely closed. Usually, when hard sundries get stuck in the sealing port, just remove the handle, unscrew the valve cover and the valve core, remove impurities, and then install them as they are to resume normal use. When the sealing nozzle of the ceramic valve core is not completely closed, hard impurities may scratch the sealing surface or the pre-tightening force on the valve core is insufficient.
4. If the connection part of the water nozzle leaks, it is usually caused by the parts not being tightened during assembly. Just tighten them. It is normal if the amount of dripping water is equivalent to the remaining water in the mouth of the water nozzle after the water source is turned off. There are many reasons for the deformation of ceramic tiles, mainly including: weak anti-deformation ability of formula, temperature difference of firing, shrinkage rate of upper and lower layers, deformation of tile paste, late deformation, grinding and so on. Deformation can not be completely solved, but can only be reduced.
Third, how to maintain sanitary ware
1. In order to ensure the correct construction and installation of the toilet, please try to seal it with glass glue. For example, the proportion of water, sediment and mortar should not be greater than 3: 1 to prevent the toilet from cracking due to excessive stress.
2, don't rush into sanitary ware newsprint, paper pads, sanitary napkins and other items that are easy to block the game.
3, accidentally fell into the bathroom debris should be removed in time. When the blockage occurs, immediately inhale through the skin to eliminate it.
4. Don't touch hard utensils or rough fabrics with ceramic products, and don't knock or bump.
5. Scrub the attached dirt with detergent regularly. If it can't be cleaned, use a brush to clean it; Keep its surface clean.
6, can not be used and stored in water environment below zero degrees Celsius.
In the above article, I told you about the top ten bathrooms in China, how to use the bathroom in China and how to use the bathroom. I believe everyone must have an understanding that good sanitary facilities can make us more comfortable when taking a bath. I hope this helps you.