Method 1 to identify the authenticity of an Amyron watch: Look at the appearance

The appearance of an Amyron watch can be determined from the shell,

glass,

Check the dial, hour, minute and second hands.

The watch case should be free of blisters and obvious scratches,

The edges and corners should be symmetrical

The joint between the back cover and the upper case should be tight

The distance between the two watch rings and the watch case is equal.

The hole for installing the earrings should be at the end of the case foot

Centered without deviation, the depth of the hole should be appropriate. The watch ring is not easy to fall off

The watch mirror should be free of defects and scratches

and transparent and bright

The three needles should be installed correctly, and the connection between the needles and the needles, the watch mirror and the dial should be correct. There should be a correct

safety gap

The dial and pointer coating have good finish, no marks, and the dial scale lines or nighttime

light spots are complete

There is a gap of about

0.1-0.3mm

between the crown and the case (Hangzhou Amyron After-sales Service Center: Qian Sijiqing Street, Jianggan District, Hangzhou City, Zhejiang Province Room 2606, 26th Floor, Tower B, China Resources Building, No. 1366 Wanxiang City, Jiang Road)

Method 2 for identifying the authenticity of Amyron watches: identification of the movement

From the movement point of view,< /p>

The plywood or pendulum in the genuine movement is marked with the corresponding trademark name

Sample

The movement is stable in the case assembly

Clean inside the movement.

There is no trademark sign on the plywood of the counterfeit Emilon watch movement

or the pendulum, or the trademark sign is rough, blurred, skewed, or simple

Use small copper pieces to paste on the ground

The inside of the movement is not clean, and some movements have copper shavings, hair, fingerprints, etc.

Inside the movement.

Third method to identify the authenticity of an Amyron watch: Look at the digital number logo

Carefully look at all the digital-related logos printed on the bottom cover of the watch,

Fake watches usually have no rules

and they don’t even match the number of digits on the real watch. Genuine watches are each individually numbered.

Four ways to identify the authenticity of Amyron watches: look at the traditional production process

Emilyon watches use traditional craftsmanship,

such as the shape of screws,< /p>

The polishing and engraving of the bottom of the watch,

as well as the special markings of some watch manufacturers on their own watches