You need to prepare a metal needle or toothpick (the thinner the better) and an eraser. ? Be careful to lift it gently from one end (be careful not to point the rib in the direction of the object to be pasted-be sure to apply force outwards). So it's possible to put a larger area- I took it off (don't let the dropped label fall on other things, or it will become secondary pollution). At the same time, there will be residual rubber, just wipe it gently with the rubber (pay attention to the position where the rubber falls at night).
Step 2: Dilemma
Soak the towel with hot water first, then wipe it repeatedly at the sticky mark, then dip the towel with soap and wipe it repeatedly at the mark, and finally wipe the soap foam with a clean warm and wet towel.
3. Lemon juice
If these stickers stick to your skin, you can wipe them off with lemon juice.
4, hand cream
Hand cream can also achieve the effect of removing adhesive, because hand cream contains a lot of water, and water contains a certain amount of surfactant. This surfactant has good wetting, penetrating and dissolving ability, and can quickly penetrate between the adhesive and the surface of the object, thus achieving the purpose of cleaning. Some similar products, such as face cream, facial cleanser and detergent, also have certain effects.
5. Removal method of edible vinegar
We spread vinegar evenly on the adhesive with a cotton swab. Through the glass, we can immediately see the slow diffusion of vinegar between the glass and the adhesive. At this time, scrape the glue back and forth with a cotton swab. Soon, the glue will start peeling off one by one, as well as on the glass.
Self-adhesive has less residual components, and it will be as clean as new when wiped with paper.
6. Edible oil removal method
Spare a spoonful of cooking oil, and then spread it evenly on the label (fragile labels will lose their viscosity under the action of oil). After 3~5 minutes, you can touch the corner of the label and tear it off slowly to avoid leaving any traces on the label.
Note: Do not overdo the above methods in actual use, which may corrode stainless steel and cause unnecessary losses.