every brand has its own logo, and tiles are no exception. The logos of tiles are all on the back of tiles, which will not affect the beauty of the items. But many people know that there are still many shoddy products. Even if there is a logo in time, it may not be genuine. There are also many brands of tiles, but some people don't know whether the logo can be faked. Then I'll tell you if the logo behind the tile can be faked. How to distinguish between good and bad tiles?
the logo behind the tile can be faked. no
the logo behind the tile can be faked. as long as there is a brand tile, it will be designed with a logo. So whether there is a logo is not the definition of distinguishing genuine products.
methods for distinguishing the quality of tiles
1. Look at
First, look at the water absorption rate of tiles. The lower the water absorption rate, the better the quality of tiles. What do you think? Drop a drop of water on the back of the ceramic tile, and look at the diffusion area of the drop. If the diffusion area is small, it means that the water absorption rate is low, and conversely, the water absorption rate is high. Look at the trademark mark again, and check whether the bottom blank of the ceramic tile has the product logo of the regular manufacturer, and it is not or fuzzy. It is recommended to choose carefully. At the same time, we must also pay attention to whether there are black spots, bubbles, pinholes, cracks, scratches, stains, missing edges, missing corners, etc. on the surface of ceramic tiles, and also pay attention to whether there are defects such as missing throwing and grinding, and whether they are deformed.
second, weigh it
after reading it, if there is no problem, weigh it again and try the feel of the tile. If you feel that the tile feels heavy, it means high density and good quality, on the contrary, it is light and poor quality.
Third, listening to
sounds can also tell whether the tiles are good or bad, but the tapping methods of different tiles may be different. The following are introduced from two aspects: kitchen and bathroom wall tiles and vitrified tiles:
1) Wall tiles or small-sized tiles are separated with one hand and five fingers to hold the tiles up, and the other hand taps the tiles' faces. If the sounds are metallic, the quality of the tiles is better;
2) For large floor tiles (glazed tiles or antique tiles used in the living room and other floors), one hand is used to lift one side of the tile, and the upper part of the palm of the other hand is used to knock the middle of the tile. If the sound is thick and the echo is long, the ceramic tile has a high degree of porcelain, strong wear resistance, high flexural strength, low water absorption and is not easy to be polluted. If the sound is cloudy and there is no echo, the porcelain degree is low (even cracks exist).
4. Open
the box for inspection to see if there is any damage. Take a piece of products from different boxes and tile them to see if there is any color difference and size.
V. Splicing
Take out four pieces of products with the same specifications and models at random, and lay them together. Through this step, we can check the three aspects of tile size, flatness and straight angle.
six, try
as long as it is aimed at the anti-slip problem of floor tiles.
the above is what I introduced. can the logo behind the tile be faked? How to distinguish between good and bad tiles? We already know about the problem of ceramic tiles. Now, in order to buy anti-counterfeiting products, we can buy them in specialty stores. After all, there are too many high imitation products now. Although the appearance of high imitation products is very similar, the quality gap is still very large.