The down jacket is too long, can it be shortened? Is there any way to change it so that no trace is visible?

First of all, let’s take a look at this down jacket. There is an obvious big hole at the hem. Because of the special location, we can only find a way to darn the hole without leaving a trace.

Method 1: Mending

If the down jacket is solid color, you can use needlework to mend it, but the needlework required for down jackets is very special, and only very fine needles can be used. The needles we usually use at home cannot be used because the needle holes are too thick and hair will leak out after sewing. If you really don’t have fine needles at home, it’s best to ask a skilled craftsman to select similar materials to help you repair it.

Method 2: Sewing rags

You can find scrap clothes of the same color at home, cut out a rag slightly larger than the broken copper, and then use a sewing machine to mend it. good.

Method 3: Embroidery pattern

Embroider a corresponding pattern on the cut area, such as a down jacket logo.

Method 4: Subsidy

Taobao sells a kind of decal paper for repairing down jackets. It is said that after buying it, cover it with a cotton towel and use an electric iron. Apply it after ironing it.

Method 5: Logo

If it is the upper part of the duck down jacket, you can buy a logo yourself. The size should be enough to cover the crack as tightly as possible. Most people will think that it is where the trademark logo is, and they can just choose the trademark logo at will. If it is a duck down jacket from a well-known brand, it can be sent to the manufacturer for repair.

Method 6: Special-purpose repair glue

Do not cut a small piece of transparent tape as it will be washed away by water if it does not touch the rotten hole. There really isn't any method or tools, it's just sewing. The purpose is to know how a person looks, not to see if the clothes look good or not. You can go to an area that specializes in mending clothes. They usually use very fine needles to mend your clothes one by one. You can't see it, and the actual effect is much better than that of sticking it on. After the heat-sealing lining is applied to the kitchen drain pipe, it can be easily repaired. The original fabric comes loose, so the actual effect is temporary.

The fabric of down jackets basically cannot be darned, which is related to the relative density of knitted products. Since the entire surface of the down jacket is high-density and coated to avoid lint leakage, speaking from my experience, it cannot be darned. Darning itself is not as expensive as you think. You can also go to a darning area and ask, but I feel that this kind of fabric cannot be darned unless your down jacket is two-layered. In other words, The first layer is wrapped with duck down, and the outer layer is made of high-grade raw materials. Some men's down jackets are made in this way. The human eye should be able to tell the difference.