1. Put some hand cream on the adhesive tape.

Apply a proper amount of hand cream to the tape that needs to be torn off. Then rub your fingers on the surface of the tape for half a minute. It's half a minute. Gently uncover the tape and wipe off the glue marks left on it. In this way, a perfect plate without glue marks appears.

Use a hair dryer

The temperature of the blower increases by expanding with heat and contracting with cold. Turn on the switch and let it stand for 10 second. Blow the tape on the plate with a hair dryer for half a minute and touch the surface temperature of the tape. A little warmer, you can start tearing the tape.

However, it should be noted that this method cannot be used if the container itself is not heat-resistant. High temperature heating may melt and deform the container, and even release toxic gases, which is very unfavorable to human health.

Wipe with an eraser

In the face of many stubborn glue marks, that is, the sticker has been cleaned up, but the glue marks remain on the surface and cannot be removed. In fact, through the friction of plasticine, these glue marks will be taken away constantly, making the surface of the bowl wall smooth and clean.

Wash with detergent

Detergent, as a powerful detergent, is easy to deal with such a stubborn guy as adhesive tape. Of course, the removal method is to apply detergent to the rubber surface, leave it for a while, and then start washing. If the button still won't come off, you can use some tools, such as a dish towel or a steel ball.