Permeability-proof practicability: Artificial stone, also known as polymer material, has the performance of anti-corrosion and anti-permeability, and is more suitable for cabinet countertops, so it is not unreasonable to be favored. It is precisely the defect of natural marble.
No worries about radiation: Compared with natural marble and artificial stone, it has no radiation and no adverse effects on human body.
Colorful: colorful and changeable, with a large choice, which is conducive to the combination of designers and meets individual needs.
Disadvantages:
Inclusion resistance: Artificial stone of any material has a Babbitt hardness of 58~62, which can't stand the "inclusion" of sharp tools such as metal. (It can be remedied by re-polishing and renovating).
Types of artificial stones:
Resin artificial stone (unsaturated resin+filler): It is the most commonly used artificial stone, and the artificial stone within 800 yuan/meter in the market belongs to "unsaturated resin plate" from the cost analysis. (Price changes within 800 yuan are affected by the quality of resin raw materials and fillers).
Composite artificial stone (resin containing MMA): due to price factors, it is not commonly used and difficult to identify. Whether there is acrylic component (mmA) in the product needs to be tested, so it belongs to the "integrity problem" of the enterprise.
Acrylic artificial stone (also known as methyl methacrylate or MMA): Dubang Clinique is the representative of acrylic artificial stone. The main advantage of acrylic is that it can be deformed and bent at will after heating, and it is expensive. The general market price is around 1800 yuan ~ 2,500 yuan/meter.
Processing methods and skills determine value:
All kinds of artificial slate only belong to "raw materials" and become cabinet countertops, which need to be processed and deformed. Therefore, no matter how good the plate is, it will not become a "beautiful and practical" cabinet countertop unless there are processing skills such as anti-rising and targeted processing methods. (The complaint rate of artificial stone is high. According to the principle and case analysis, improper handling accounts for more than 80%). It can be seen that the value of processing skills comes from the perception after practice.
Processing technology is an important factor in choosing cost performance, and there is a great difference between aesthetics and practical performance.
Processing method determines quality:
Deformation processing in the factory is not difficult: as long as you have "quality consciousness" and master the basic skills of artificial stone cutting, bonding, milling, carving and polishing, you can complete the processing process from plate to cabinet countertop. (The inherent process standards are different, so there will be differences. ).
On-site ability and difficulty are great: First, adaptability. The yin and yang angle of the kitchen is generally not 900, and the countertop needs to conform to the site environment. The gap between the back water and the wall is generally controlled at 5 mm Facing various angles of yin and yang, there is no room for installation in the narrow space of the kitchen, which is very difficult. This is also the main reason for the failure and rework of the installation of cabinets and countertops. The difficulty of this final installation process is "completely unknown" to consumers before purchasing.
Question 2: What is the material of science and technology stone? What's the use? Science and technology stone is artificial stone, which has many uses, such as walls and countertops. The cost is about 800 yuan per square meter.
Question 3: What are the advantages and disadvantages of high-tech stone TV wall? Advantages are graded, and disadvantages are afraid of radiation.
Question 4: What is the difference between scientific marble and transparent stone?
Question 5: What are the disadvantages of composite microcrystalline stone? It is not the advantage of 1 or the lack of strength.
For this new material, the strength should be tested many times, but the strength of the product itself is not enough, so it is difficult to meet better standards and requirements. Generally speaking, strength has a fixed reference standard. For example, the Mohs hardness of the jade layer on the surface of microcrystalline stone is 5-6, and its strength is 6-7 lower than that of polished brick.
The scratches on the building materials are obvious.
Scratches are obviously a concern of many consumers. The surface gloss of microcrystalline stone is high, up to 90%. If it is scratched, it is easy to appear.
3. Building materials get dirty easily.
Microcrystalline, as a new material, has high surface gloss and relatively light color. Therefore, when using microcrystals, we should pay special attention to the dirty space. The decorative effect of microcrystalline stone is beautiful, but it is easy to get dirty in use, so families with children should pay attention to it.
Question 6: Hello, top ten stone brands in China. I'll give you a list of stone brands.
Universal UMGG
Starting from 1986, Guangdong famous brand products, Guangdong famous trademarks, national high-tech enterprises, industry famous brands, Global Stone (Dongguan) Co., Ltd.
Feng Wan stone material
China stone industry star enterprise, artificial stone national standard designated drafting enterprise, Guangdong famous trademark, Guangdong famous brand product, China artificial stone famous brand product, high-tech enterprise, Feng Wan Stone Technology Co., Ltd.
Conley
Guangdong famous brand products, Fujian famous brand products, one of the drafting units of the national standard "Natural Marble Building Plate", Shenzhen Li Kang Stone Group Co., Ltd.
Gaoshi
The largest stone company in Asia, the largest and most influential brand in the industry, Gaoshi Stone Group Co., Ltd.
East star
Fujian famous trademark, Fujian famous brand product, one of the most influential large-scale comprehensive enterprises in the stone industry, Fujian Quanzhou Nanxing Marble Co., Ltd.
Hongfa
China famous trademark, Fujian famous brand products, top ten stone brands, Fujian Hongfa Group Co., Ltd.
Lu Guan
Shandong famous trademark, one of the leaders and standard setters in the stone industry, Lu Guan Building Materials Industry Group)
Enter eastward
Guangdong famous trademark, Guangdong famous trademark, China most influential brand, Dongguan Dongcheng Stone Co., Ltd.)
Fengshan
China famous trademark, Fujian famous trademark, top ten stone brands, Fujian Fengshan Stone Group Co., Ltd.
Tower star
Top ten stone brands, Shanghai famous brand, the most valuable brand enterprise in the stone industry, Shanghai Taixing stone co., ltd.
Question 7: What does the stone curtain wall need to be tested? 1. Three tests are required: wind pressure deformation performance, air tightness and water tightness;
2. Also added some: in-plane deformation performance and other performance tests, which are often referred to as four characteristics; 3. Angle steel and channel steel do not need a second interview; 4, need to do the second interview materials are:
Peel strength of (1) aluminum-plastic composite board;
(2) The flexural strength of stone, the frost resistance of stone in cold areas, and the radioactivity of indoor granite; (3) The pollution of sealant to stone.
(4) Shore hardness and tensile bond strength of curtain wall structural adhesive under standard conditions.
(5) Compatibility and peeling adhesion test of structural sealant, weatherproof sealant and their contact materials for curtain wall (these two indexes cannot be provided in the sealant factory inspection report, but they must be reinspected before sealing is used);
5. Field experiment to be done: (1) Field pull-out test of rear embedded parts, with the number of samples randomly selected according to the proportion specified in the specification;
(2) Peeling test of silicone structural sealant, the number of samples is per 100 component 1 piece;
(3) If two-component silicone structural sealant is used, uniformity (butterfly) and rupture (plastic cup) tests should also be conducted. Just make a group of the same type;
(4) All water spraying tests;
Question 8: Stone itself has some disadvantages, such as heavy weight, low tensile and bending strength and difficult connection. As a high-grade building decoration material, stone is widely used in indoor and outdoor decoration design, curtain wall decoration and public facilities construction. At present, the common stones on the market are mainly divided into natural stones and artificial stones. Natural stone can be divided into slate and granite according to its physical and chemical characteristics. Artificial stone is divided into terrazzo and synthetic stone according to technology. Terrazzo is forged from cement, concrete and other raw materials; Artificial stone is made from crushed stone of natural stone, added with adhesive, pressed and polished. The latter two are artificially made, so the strength is not as high as that of natural stone. Stone is a high-grade product of building decoration materials. Natural stone can be roughly divided into granite, slate, sandstone, limestone, volcanic rock and so on. With the continuous development and progress of science and technology, artificial stone products are also changing with each passing day, and the quality and beauty are no less than natural stone. With the development of architectural design, stone has become one of the important raw materials for building, decoration and road and bridge construction.
Question 9: What are the advantages of stone landscape rocks? As a high-grade building decoration material, stone is widely used in indoor and outdoor decoration design, curtain wall decoration and public facilities construction. At present, the common stones on the market are mainly divided into natural stones and artificial stones. Natural stone can be divided into slate and granite according to its physical and chemical characteristics. Artificial stone is divided into terrazzo and synthetic stone according to technology. Terrazzo is forged from cement, concrete and other raw materials; Artificial stone is made from crushed stone of natural stone, added with adhesive, pressed and polished. The latter two are artificially made, so the strength is not as high as that of natural stone. Stone is a high-grade product of building decoration materials. Natural stone can be roughly divided into granite, slate, sandstone, limestone, volcanic rock and so on. With the continuous development and progress of science and technology, artificial stone products are also changing with each passing day, and the quality and beauty are no less than natural stone. With the development of architectural design, stone has become one of the important raw materials for building, decoration and road and bridge construction.
Question 10: Stone itself has some disadvantages, such as heavy weight, low tensile and bending strength and difficult connection. As a high-grade building decoration material, stone is widely used in indoor and outdoor decoration design, curtain wall decoration and public facilities construction. At present, the common stones on the market are mainly divided into natural stones and artificial stones. Natural stone can be divided into slate and granite according to its physical and chemical characteristics. Artificial stone is divided into terrazzo and synthetic stone according to technology. Terrazzo is forged from cement, concrete and other raw materials; Artificial stone is made from crushed stone of natural stone, added with adhesive, pressed and polished. The latter two are artificially made, so the strength is not as high as that of natural stone. Stone is a high-grade product of building decoration materials. Natural stone can be roughly divided into granite, slate, sandstone, limestone, volcanic rock and so on. With the continuous development and progress of science and technology, artificial stone products are also changing with each passing day, and the quality and beauty are no less than natural stone. With the development of architectural design, stone has become one of the important raw materials for building, decoration and road and bridge construction.