What we have to do is to put away the furniture that has been knocked out of the groove, and then take out the water and pour it on the knocked out groove of the wooden furniture. Be sure not to pour too much, just fill the groove. Then we take out our own super absorbent towel and cover it directly on the groove. This is the process of wood furniture absorbing water. Secondly, we took out our electric iron, turned on the highest temperature without mercy, and then ironed the washed towels in circles like we usually iron clothes until the towels were completely dry. The wooden furniture covering us will absorb enough moisture and expand, causing the recessed parts to bulge out a little, allowing the recessed parts to slowly begin to fill back.

Rattan or bamboo products can become stained and discolored after prolonged use. You can scrub them with salt water, which not only removes stains but also makes them soft and elastic. Wipe with a damp towel to keep it clean. Using fireproof board to brew tea on the coffee table will leave unsightly patches of stains over time. At this time, you can sprinkle some water on the table, wipe it with the tin foil paper in the cigarette case, and then scrub it with water to wash away the tea stains. Hot cups, plates, etc. Placing it directly on the paint surface of furniture will leave a circle of burn marks.

Generally, you can use a rag dipped in kerosene, alcohol, toilet water or strong tea to wipe it, or use iodine to lightly rub the burn or apply a layer of petroleum jelly on the burn; wipe the burn mark with a rag every two days to eliminate it. Burning objects, such as fireworks, soot, or unlit matches; sometimes leave scorch marks on furniture paint. If the paint is scorched, wrap a fine hard cloth around a toothpick and gently wipe away the marks. Then apply a layer of wax and the scorch marks can be removed. After the trademarks on the furniture are wiped off, they will leave glue residue, which is sticky and dirty.

It can be removed with a thick eraser, and chewing gum on the floor can also be removed with an eraser. However, wood absorbs water very slowly. There's a good chance we didn't fully bounce the dent back once or twice, but that doesn't matter. Just do it a few times and you'll see incredible results. But there may still be some flaws, just a little bit of marks. Don't think of it as a failure at this time. At this time, we only need to find a piece of sandpaper and gently rub the only scratches on the wooden furniture, and the family members will be healed immediately. Carpets are usually used in public places, and routine maintenance is the main factor that can keep office carpets clean and beautiful for a long time. It is recommended to vacuum every day. Each section should be vacuumed twice. First, it should be used against the carpet pile. Although it is hard work, it can be applied thoroughly. The second coat should be applied along the carpet pile, which can restore the original pile orientation of the carpet, prevent pile disorder, and avoid color difference in the carpet. It’s important to emphasize that no matter how many times you vacuum your carpet, the next time you vacuum it, you need to vacuum back along the pile head.