first, the outer packaging of iQOO 5 Pro
The outer packaging of iQOO 5 Pro has a black appearance as a whole, and the information of iQOO and BMW's BMW M Motorsport Premium Partner is on the top of the box.
the iQOO 5 Pro's packaging box is still a unique style design, with an oblique theme design ID, a pure black packaging box, an oblique opening track on the side, and the model of the mobile phone in the upper right corner.
2. Unpacking
Open the box directly. The first layer above is the packaging of the paper accessory box, which is written in yellow font: iQOO 5 Pro opens the passion and charm that can't be missed.
paper accessories include iQOO 5 Pro instruction manual, co-branded cards and pins.
the following is iQOO 5 Pro mobile phone, and the surface of the mobile phone is protected by transparent film.
the transparent film also has a warm reminder: point out the position of the micro-cracks of the receiver, and when sticking the toughened film, it is necessary to avoid the glue from flowing into the side keys and the micro-cracks of the receiver, and pay attention to shielding and protection. The elliptical position on the right side is the infrared photosensitive area.
it can be seen from the tip of the sticker that iQOO 5 Pro uses the screen fingerprint unlocking technology, and it needs to use the official customized film of vivo screen fingerprint. Using the third-party film will affect the screen fingerprint recognition effect.
you can take out the phone directly by holding the handle left by the protective film.
a clear water protective cover is attached below.
take out the protective case, and there is the charging suit below.
finally, let's have a family photo out of the box, iQOO 5 Pro, charging set, paper accessories and card fetching needle.
iii. iQOO 5 Pro
The front of the latest iQOO 5 Pro is a 6.56-inch 3D super-vision flexible screen from Samsung, with a resolution of 2376×18 and a screen ratio of 19.8:9, which accounts for 92.6% of the screen, supports a high refresh rate of 12Hz and has passed the HDR1+ standard certification.
in terms of performance, it is equipped with Qualcomm Snapdragon 865 mobile platform, 7nm process, Samsung LPDDR5 storage and UFS3.1 flash memory, and the storage capacity can be up to 12GB.
the front of iQOO 5 Pro is a front-facing single shot in the upper left corner, with 16 million pixels and an aperture of f/2.45.
just as the translucent protective film mentioned above, the front earpiece of iQOO 5 Pro is really very small, and the .3mm micro-slit earpiece is hidden in the gap between the screen and the frame.
Moreover, the bottom border of the mobile phone is also very narrow. The bottom border of 3.7mm further increases the screen ratio of the mobile phone, and the "chin" is tightened well.
this iQOO 5 Pro adopts a hyperbolic screen design, so that a better look and feel can be achieved on the front.
iQOO 5 Pro has two color schemes, specifically, it should be made of two shell materials. One is the track version, and the glass battery cover on the back is frosted, which brings a delicate touch with the matte Kevlar material. The other is the legendary version. The grain of the white plain leather of the back cover imitates the texture of the road surface, and the three-color stripes run through the whole as a racetrack, with excellent texture and visual sense.
on the back of the mobile phone are three cameras arranged vertically, which are 5-megapixel ultra-clear main camera and f/1.85 aperture; 13 megapixel super wide-angle lens, f/2.2 aperture and 8 megapixel periscope camera, f/3.4 aperture. Support OIS+EIS anti-shake and autofocus as well as 5x optical zoom and 6x super zoom. The flash is on one side, and there is a string of English signs on it: fascination Meet innavation, which means charm meets innovation.
iQOO brand logo can also be seen on the track on the back of the mobile phone.
The front and back of the mobile phone are designed with hyperboloids, which can get a better grip. The two antenna partitions on the left are located at the top and bottom.
on the right is the integrated volume control button and power button, and the upper and lower sides are antenna partitions respectively.
at the bottom of the phone are the speaker opening, USB-C charging interface, microphone and SIM card slot.
there is also a microphone opening on the top of the mobile phone, with antenna partitions on both sides.
the overall thickness of the mobile phone is about 8.9mm, and the thickness of the mobile phone is slightly lower than half the height of the one-dollar coin by attaching the one-dollar coin to the side.
the net weight of the mobile phone is about 2g, which is about 4g more than the official data. Because the mobile phone has been coated, there will be some errors.
iv. 12W ultra-flash charger
In addition to the performance configuration, screen performance and eye-catching camera part, the charging aspect of the mobile phone is also a highlight of this iQOO 5 Pro. As a mobile phone with iQOO series supporting 12W ultra-high charging power for the first time, the charging performance is believed to make more people shine.
the overall appearance of the charger equipped with iQOO 5 Pro is white, and the parameter surface is orange.
you can see the bright design of 12W logo on the frosted shell surface, which is also the maximum output power supported by this charger, and the pins are non-foldable.
the interface of the charger is a single USB-A output interface with a white base inside.
use the macro lens to look at the inside of the interface. The four shrapnel are widened at both sides. The power of 12W must pass through a large current at the interface end. Besides, a special contact can be seen at the outside, which is also the key to shaking hands for 12W ultra-flash charging.
use Power-Z KT2 to read the fast charging protocol of the charger, and the actual measurement supports QC and PD3. fast charging protocols.
reading the PDO message of the charger supports five fixed voltage gears: 5V 3A, 9V 3A, 12V 3A, 15V 3A and 2V3.25a. The charger supports iQOO 5 Pro 12W ultra-flash charging and 65W PD fast charging, which is a good design.
the orange shell is printed with the parameter information of the charger:
FlashCharge 12W charger.
model V126LC-CN
Input: 1-24V 5/6Hz 2A
Output: 5V 2A, 9V 2A, 11V 3A, 11V 5A, 2V 6A
It seems that this charger of iQOO not only supports iQOO 5 Pro's 12W ultra-flash charging and 65W PD fast charging.
the measured charging power of MacBook Pro with the original fast charging cable can reach 19.92V 2.89A 57.68W, which successfully shakes hands with PD for fast charging.
the length of the charger measured by caliper is about 66.5mm ..
the width is about 65.6mm, which is close to a square.
the thickness is about 28.92mm ..
the overall thickness is slightly higher than that of a dollar coin.
the net weight of the charger is about 23g.
v. Fast charging cable
The charger is configured with a single USB-A output interface, and the attached charging cable connector type is naturally USB-A to USB-C fast charging cable.
the wire of the charging cable is white, and there is no obvious burr on the surface.
the end of the net is lengthened, and the logo of 12W and double lightning can be seen at the USB-A connector end.
inside the USB-A connector, the contacts on both sides are widened to carry large current, and there is an additional contact inside the four contacts, which is connected with the contact inside the USB-a interface of the charger to realize the purpose of shaking hands for 12W ultra-flash charging.
moreover, the matching wire is different from the conventional charging wire attached to the mobile phone. iQOO 5 Pro comes standard with a charging wire with a length of 1.5m, so that it can be charged without being bound by the wire.
the diameter of the wire is about 3.85mm ..
VI. 12W ultra-flash charging
iQOO 5 Pro supports 12W ultra-flash charging at this conference, which means that the charging technology of iQOO mobile phone has taken a big step forward, which can be said to be a revolutionary update, stepping into the 1-watt charging mark and reaching a new height.
I actually used the original charging kit to charge iQOO 5 Pro, and the power reached 17.82v5.81a13.64w. I successfully shook hands with 12W for ultra-flash charging.
The logo of FlashCharge Ultra Flash Charge is also displayed on the screen of the mobile phone. At this time, the battery capacity of the mobile phone is 61%.
and there is a double lightning sign beside the battery sign. On the status bar, you can also see that the mobile phone has been connected to two WiFi networks, which is why iQOO 5 Pro supports WLAN 2.4G and WiFi 6 to be online at the same time, ensuring the network always online.
VII. Compatibility test of charging accessories
iQOO 5 Pro can get 1 watts of charging power by using the original charging kit, so what will happen if one of the charging powers is replaced? I used the original charger with the ordinary USB-A to USB-C charging cable to charge iQOO 5 Pro, and the charging power was 8.47V2.95a25.2W.. Obviously, there is no handshake 12W super flash charging, but it is also in a fast charging state, which is another option besides the original charging cable.
iQOO 5 Pro is charged with the original charger and iQOO5 original charging cable. At this time, the charging power is 8.7V4.97A43.31W. It can be seen that the power of ordinary A to C charging cable is improved.
use the charger that supports QC fast charge to charge the mobile phone. At this time, the power is 9.15V 1.89A 17.32W, which successfully shakes hands with QC fast charge. iQOO 5 Pro also supports 18W QC fast charge.
finally, the iQOO 5 Pro is charged with PD charger, and the charging power is 9.V1.89A17.4W. The iQOO 5 Pro also supports 18W PD fast charging, and it can also get 9V fast charging when using other chargers, which is an alternative fast charging scheme besides the original charger.
VIII. Full charging test
At the press conference, iQOO 5 Pro's support for 12W ultra-flash charging is definitely a highlight of this conference. iQOO 5 Pro is internally equipped with 6C high-rate batteries, and a single 2mAh battery can support the maximum input current of 12A. Let's actually test the performance of iQOO 5 Pro in the whole charging process.
before the test, let's popularize the charging principle adopted by iQOO 5 Pro. The charger charges the mobile phone with high voltage and high current of 2V 6A. After entering the mobile phone, the voltage and current are converted into 1V 12A to charge two 6C high-rate batteries connected in series, thus realizing the process of high-power charging of 12W.
the above is the whole test process of iQOO 5 Pro using the original 12W charger. The whole test process is divided into three stages. Let's start with the conclusion that it only takes 16 minutes and 2s for the mobile phone battery to be fully charged. Below I will separate each stage for a detailed explanation.
iQOO 5 Pro original charger entered the first stage of the whole process. After a short shutdown and charging, the power in the front quickly rose to 2V 6A fast charging input gear. At this time, the input power was about 1W, which lasted for about 3 minutes and 26s. Then the power and current began to appear small and regular jitter. In the first stage, it is in the state of direct charging with high voltage and high current. After being converted by two charge pumps, 2V 6A at the charger end becomes 1V 12A to directly charge two batteries.
after a small and regular jitter, the voltage is still at the high voltage input of 17V, and the power and current begin to decline in two long steps. From 4: 35s to 6: 51s, the current is in the stage of 4A high current input, and the power is about 66W at this time. After more than 2 minutes, the current drops to 3A input gear again. 6 minutes, 51s to 14 stages, and the power is about 52W. 4: 35 to 14: This is the second stage of charging, and it is also the longest stage in the whole charging process. The power lasts for more than 2 minutes at 66W and about 7 minutes at 52W.
finally, the third stage of the original charger input, that is, the final trickle charging finishing stage, charges the "last mile". From 14: to the end of charging, the power and current gradually decreased, and the whole process took about 16 minutes and 2s.
it takes about a quarter of an hour to fully charge the 4mAh battery of a mobile phone, which was really unthinkable before. But today, with the development of science and technology, many technologies that dare not think are now dare to think and can be realized. After drawing the whole input process of the original charger into a graph, it is found that the mobile phone is charged with half of the power in just 5 minutes, 77% in 1 minutes, and fully charged in 16 minutes. This charging curve still looks very shocking.
summary of the whole input test of the original 12W charger
iQOO's first mobile phone supporting 12W ultra-flash charging passed the T? V Safe Fast Charging Certification 12W fast charging, the charger adopts the input scheme of 2V high voltage and large current, and after two customized top-level charge pump chips with charging conversion rate of 98.5%, 1V/12A is finally converted into (5V/12A)×2 by the principle of series voltage reduction, so that such a large charging power can be realized. The battery inside the mobile phone is 6C high-rate battery core, and the cycle times of the battery can reach 1 times, which can prolong the service life of the battery under the premise of super charging power.
IX. Temperature rise test
iQOO 5 Pro supports an ultra-large charging power of 12W, which can fully charge the battery of the mobile phone in about 16 minutes. The whole charging technology has also passed the T?