2. Some surfaces can be removed by repeatedly sticking and tearing with transparent adhesive.
3. Wipe it off with a little sodium chloride or paint thinner.
4, you can use a hair dryer to dry, and then gently stir.
5. Wipe with cotton swab nail polish remover.
6, wind oil fine rub.
7, use special cleaner or sports shoes decontamination tube to wipe.
8. You can erase it with 4b eraser for painting, which is a very soft Korean eraser.
9. If the trace left by time becomes hard, you can soften it with a hot towel first and try again.
10, you can try to apply oily substances such as skin cream, which is easy to wipe off.
Tell you some tips for cleaning plastic pots:
Coup 1: Wrap the remaining tea leaves in gauze, dip them in proper amount of cooking oil, and then clean them with a small amount of detergent. Compared with the traditional method of scrubbing with plant cloth, this method avoids scratching the surface of plastic products. However, the surface of plastic products will be uneven after being scratched, and it is easier to accumulate scale. This is based on the principle that oil absorbs oil.
Coup 2: After the washbasin is used up, you can pour the appropriate decontamination powder into the basin, then wipe it with a rag, and then rinse it with clear water. You can also wet the towel after using it with hot water, then wipe the washbasin with soap, and finally wash it with clear water. These are very simple methods and won't take up too much time.
Coup 3: Remove the dirt from the plastic washbasin by dipping a brush in toothpaste. That is to say, you can squeeze toothpaste on the brush, and then brush all the places with dirt in the plastic washbasin, and you can see that the dirt has been brushed off, because toothpaste generally contains friction agent, which can easily remove the dirt attached to the smooth surface, and this method is not only convenient and simple to operate, but also will not damage the washbasin, so consumers who are troubled in this aspect can try it and get good results.