1 American rural style design features
"; s:7:"summary"; S:711:"
The following is an introduction to the characteristics of American pastoral style design for consumers' reference:
(1) The overall atmosphere created by American pastoral style design is very warm, and it is both aesthetic and practical.
(2) There are relatively many soft clothes designed in American pastoral style, and the use of logs is also very frequent.
(3) The overall tone of the American pastoral style design is bright, and it also has a strong preference for stone materials.
(4) American pastoral style design uses a lot of decorative paintings and some green plants, so it can give people a sense of nature.
(5) American pastoral design pursues a sense of retro, and it is best to have some antique designs.
"; s:8:"art_link"; s::""; s:8:"ordernum"; i:; s:6:"imgurl"; s::""; s:8:"filename"; s::""; }i:1; a:6:{s:6:"mtitle"; S:36:"
2 American rural style design concept
"; s:7:"summary"; S:868:"
The basic concept of American rural style design mainly comes from the natural beauty and the fresh feeling of the garden. American pastoral style design is not too ornate, but it can always achieve attractive results by using some unique decorations. American pastoral design uses a lot of lace, broken flowers and some lace and bright colors, which is also one of its most distinctive aspects.
American pastoral design always has a romantic temperament, as if you can feel the sweetness brought by different patterns. In addition, the use of some knitted goods can always give people a very fresh feeling.
For the fast-paced life now, the concept of American rural style design can lead consumers back to the most primitive calm, and they can feel a unique comfort and relaxation at home, as if they can temporarily separate from the world.
"; s:8:"art_link"; s::""; s:8:"ordernum"; i:1; s:6:"imgurl"; s::""; s:8:"filename"; s::""; }i:2; a:6:{s:6:"mtitle"; S:36:"
3 American rural style design collocation
"; s:7:"summary"; S:896:"
The following will introduce the collocation skills of American rural style design for consumers' reference:
(1) Comfort should be paid attention to in the collocation of American rural style design.
(2) American rural style design generally likes to use an open kitchen, which can make the overall residential space more spacious.
(3) American rural style design attaches great importance to practicality, so it will set up as many partitions as possible.
(4) American pastoral style design should not choose too gorgeous decoration, and it is best to pursue simplicity as much as possible.
(5) American rural style design must not deviate from its original elements. Although it is very simple, it should not be sloppy.
(6) In the choice of furniture color, American rural style design prefers white series and complete sets, and with some wrought iron elements, it can make the house more pastoral.
"; s:8:"art_link"; s::""; s:8:"ordernum"; i:2; s:6:"imgurl"; s::""; s:8:"filename"; s::""; }i:3; a:6:{s:6:"mtitle"; S:3:"
4 How to disassemble and assemble the flying carving socket
"; s:7:"summary"; S:681:"
Instructions for installation of flying carving socket: first remove the switch socket frame, and then carefully pry the rocker from the side to see the screw holes on both sides.
Wiring Rules for Flying Carved Sockets
If the live wire, neutral wire and ground wire are wrongly connected, it will probably cause a leakage accident. Therefore, the wiring of the wiring hole on the socket must be in accordance with the rule of "grounding on the left zero and right fire".
"Left zero and right fire grounding" means facing the front of three hole socket (not the back with wiring holes), with a jack on the left as the neutral wire, the jack on the right as the live wire and the jack on the top as the ground wire. In the case of a two-hole socket, normally the left side is connected to the zero line and the right side to the live line. (zero line: n fire line: l ground line: e, PE)
"; s:8:"art_link"; s::""; s:8:"ordernum"; i:3; s:6:"imgurl"; s::""; s:8:"filename"; s::""; }i:4; a:6:{s:6:"mtitle"; S:24:"
5 shower head selection
"; s:7:"summary"; S:2529:"
A shower head will directly affect a person's bathing quality, so how to choose a shower head is very important.
1. "Four Look":
1) See whether the pipe body and the electroplated layer on the surface of the shower are smooth. This is because, in the humid environment such as the bathroom, the surface of the shower head is generally chrome-plated, but it is also chrome-plated, but the process treatment is very different. According to the merchants, a good pipe body is made of all copper, and the surface should be polished, polished, dusted, nickel plated, chrome plated, etc., to ensure that it will not become black and blistered during use. Generally speaking, from the surface of the shower, the brighter and more delicate it can be seen by the naked eye, the better the coating process is;
2) Look at the valve core. The valve core is a part to control the direction, pressure and flow, which directly affects the length of use and the comfort experience. Look at the valve core depends on the hardness of ceramics, if the valve core is not smooth and wear-resistant, it is best not to choose;
3) Look at the spray mode, because of the different internal design, the spray mode of shower shower head is also different. The general hand-held shower head also has the functions of maser and massage, and diversified spraying methods can bring the upgrade experience of shower;
4) Look at the spray effect, that is, look at whether the water jet from each hole is balanced. For a shower with good spray effect, the water distributed by each hole, even the smallest hole, is basically uniform.
2. grip: hold the pipe body by hand to judge the quality of the material. Both are chrome-plated showers, and some unscrupulous merchants will use cast iron pipes to pretend to be all copper pipes. A simple judgment method is to hold the pipe body by hand and let it go after 2 or 3 seconds. If the fog on the pipe body persists for a long time, it is likely to be cast iron pipes. If the pipe body hardly changes after the hand leaves, it can basically be judged to be copper pipes. In addition, the tapping sound of copper pipe is crisp, and the sound of cast iron pipe is low and stuffy. Tapping is also a method to judge the material of shower pipe.
3. Q: As the saying goes, amateurs watch the excitement and experts watch the doorway. The quality of the shower is good, and the invisible place is the most important, so be sure to ask the merchant about the material and service life of the shower switch spool. The valve core of shower switch is made of ceramics with extremely high hardness, and its service life should reach the national standard of 2, times. Therefore, we should not neglect the internal quality just for the sake of low price or good appearance, which will cause inconvenience to our future life.
4. Pick: When picking, let the shower nozzle incline to discharge water. If the discharge from the top nozzle is obviously small or not at all, it means that the internal design of the shower nozzle is very general, and even if there are many ways of discharging water, such as lasing and spraying, the user may not get the corresponding comfortable experience.
"; s:8:"art_link"; s::""; s:8:"ordernum"; i:4; s:6:"imgurl"; s::""; s:8:"filename"; s::""; }i:5; a:6:{s:6:"mtitle"; S:21:"
6 Application of aluminum-plastic plate
"; s:7:"summary"; S:912:"
Aluminum-plastic sheet is a new type of material, which is widely used. There are the following common types:
1. For building curtain wall: the minimum thickness of the upper and lower aluminum sheets should not be less than .5mm, and the total thickness should not be less than 4 mm.. The material of aluminum shall meet the requirements of GB/T 388, and generally aluminum alloy plates of series 3 and 5 shall be used, and the coating shall be fluorocarbon resin coating.
2. Exterior wall decoration and advertising: the upper and lower aluminum plates shall be made of rust-proof aluminum with a thickness of not less than .2mm, and the total thickness shall be not less than 4mm. The coating generally adopts fluorocarbon coating or polyester coating.
3. Indoor use: The upper and lower aluminum plates are generally made of aluminum plates with a thickness of .2mm and a minimum thickness of not less than .1mm, with a total thickness of 3mm. The coating adopts polyester coating or acrylic coating.
Aluminum-plastic panels have many other uses, such as the modification and renovation of old building external walls, balconies, equipment units, indoor compartments, panels, sign boards, display stands, industrial materials, and the body of cold-keeping cars.
"; s:8:"art_link"; s::""; s:8:"ordernum"; i:5; s:6:"imgurl"; s::""; s:8:"filename"; s::""; }i:6; a:6:{s:6:"mtitle"; S:21:"
7 aluminum-plastic board brand
"; s:7:"summary"; S:1851:"
1. Auspicious: Originated in Taiwan Province in 1966, Nantong Auspicious Industrial Co., Ltd. has the top technical level in the industry, high-quality aluminum-plastic plate production enterprises, and its products have a high reputation.
2. Seven colors: China well-known trademark, Shandong famous trademark, high-tech enterprise, with many national patents on intellectual property rights, green building materials products, Donge Lantian Seven Colors Building Materials Co., Ltd.
3. Yalitai: a well-known trademark in China, a high-tech enterprise, a pioneer in the new standard of aluminum-plastic composite panels for building curtain walls, and enjoys a high reputation in the market. Jiangxi Yalitai Building Materials Co., Ltd.
4. Waltai: the drafting and editing unit of relevant national standards for aluminum-plastic composite panels, a well-known trademark in China, a famous trademark in Guangdong Province, a green building material product in China, and Dongguan Waltai Decoration Material Co., Ltd.
5. Yatai: a national high-tech enterprise, a famous trademark in Shanghai, a famous brand product in Shanghai, and the drafting and revision unit of the relevant national standards for aluminum-plastic composite panels, Yatai Industrial Group Co., Ltd.
6. Jiyi: Shanghai famous brand product, Shanghai famous trademark, drafting and editing unit of relevant national standards for aluminum-plastic composite board, recommended product of China construction project, Jixiang Group Co., Ltd.
7. Huayuan: a Sino-foreign joint venture, a well-known trademark in China, a high-tech enterprise in Shanghai, which sells well at home and abroad with excellent technology and quality, and Shanghai Huayuan Composite New Materials Co., Ltd.
8. Fangda: a Sino-foreign joint venture, a national high-tech enterprise, and a famous brand product in Jiangxi Province. Fangda New Materials (Jiangxi) Co., Ltd.
9. Haida: China well-known trademark, Jiangsu famous brand, professional R&D and manufacturer of aluminum-plastic composite board/aluminum veneer/aluminum profile, top ten brands of aluminum-plastic board, Jiangyin Litai Decoration Material Co., Ltd.
1. Huatian HTB: a national standard contributor of aluminum-plastic panels, a professional R&D manufacturer of aluminum-plastic panels/curtain wall decorative materials, a leading brand in the fire-proof aluminum-plastic composite panel industry, and Hunan Huatian Aluminum Co., Ltd.
"; s:8:"art_link"; s::""; s:8:"ordernum"; i:6; s:6:"imgurl"; s::""; s:8:"filename"; s::""; }i:7; a:6:{s:6:"mtitle"; S:21:"
8 aluminum-plastic ceiling
"; s:7:"summary"; S:476:"
Construction process of aluminum-plastic ceiling:
1. Check whether the framework is firmly installed, whether the suspenders are vertical, the spacing should be less than 5mm, and the main fittings should be closely connected.
2. The aluminum-plastic plate should be cut accurately, with straight corners and no defects.
3. Laying between boards should be tight and aligned, and the gap size should be consistent.
4. The edge of the aluminum-plastic plate is laid vertically with the supporting keel. The joint between two walls cannot be on the same keel at the same time.
"; s:8:"art_link"; s::""; s:8:"ordernum"; i:7; s:6:"imgurl"; s::""; s:8:"filename"; s::""; }i:8; a:6:{s:6:"mtitle"; S:21:"
9 aluminum-plastic plate installation
"; s:7:"summary"; S:5223:"
1. Keel layout and elastic line
1. Elastic line: determine the elevation control line and keel layout line. If the ceiling changes in elevation, determine the corresponding position of the variable cross-section part, and then fix the angle aluminum along the elevation line.
2. Determine the position line of the keel: arrange the structural size of the ceiling skeleton according to the size specifications of aluminum-plastic plates and the area size of the ceiling, and require the pattern of the plate combination to be complete. When the edges are left around, the size of the edges should be uniform or symmetrical, and draw the arranged position line of the keel skeleton on the top of the elevation line.
3. Installation and leveling of keel: according to the vertical and horizontal elevation control line, start from one end, level while installing, and then uniformly fine adjust it again.
4. Installation of steel and aluminum keels: When installing aluminum keels, first fix the aluminum keels on the floor according to the size and position of the flip chart, which must be installed firmly, with a flat surface and accurate dimensions. For the part installed with steel keel, in order to prevent electrochemical corrosion, anti-corrosion treatment or gasket should be carried out.
2. Installation of block boards
The aluminum-plastic board is connected with another aluminum-plastic board or other materials through rivets, bolts, screws, nails, etc. However, because the surface of aluminum-plastic plate is aluminum, when it is connected with different metal materials, electrochemical corrosion will occur, so it is necessary to use aluminum or stainless steel riveting bolts to carry out the plate or plate and other