With the continuous development of society, our life has become more and more detailed. Take the faucet as an example. In the past, there was probably only one faucet in our house, which was used for washing faces, vegetables and mops. But now we divide faucets into many kinds. For example, I always install a faucet on my sink and install it in the kitchen. Some people don't know much about the faucet on the sink and don't know what material to choose. Next, Bian Xiao will introduce the faucet on the sink to you in detail.

Vegetable basin faucet-installation method of kitchen vegetable basin faucet

Generally, the installation method of kitchen sink faucet is to embed the valve core of faucet into the wall. Pay attention to the thickness of bathroom wall before embedding. If the wall is too thin, the valve core cannot be embedded. Do not take off the plastic protective sleeve of the valve core easily when burying, so as to avoid damaging the valve core by cement and other sundries when burying. In addition, when you bury the valve core, you should also pay attention to the up, down, left and right directions of the valve core to avoid burying the valve core wrong. When the wall-mounted faucet is embedded in the water inlet pipe, the size is deviated, and the position can be corrected with an adjustable crutch. Before installing the thermostatic faucet, please check whether the water pipe is hot on the left and cold on the right, and remember not to connect the hot and cold water pipes by mistake to avoid the faucet from working normally. Gas and solar water heaters cannot use constant temperature faucets because the water pressure is too low. Please don't forget to install the hot and cold water filter when installing the thermostatic faucet.

Pot faucet-Brand recommendation of kitchen pot faucet

1, primy (English)

China famous brand, China famous trademark, engaged in the development of kitchen and bathroom products. Zhuhai Pulemei Kitchen & Bathroom Co., Ltd. Zhuhai Pulemei Kitchen & Bathroom Co., Ltd. was established in 1998. It consists of a mold factory, a bathroom factory and a sink factory. It has also established a Pulemei (China) brand marketing management center, a technology innovation center and a product research and development center to make bathroom products of leading international brands.

2. Jiumu Jiumu (Jiumu Group Co., Ltd)

Jiumu Group Co., Ltd., Jiumu Jiumu, top ten brands of faucet-shower, top ten brands of bathroom-sanitary ware, top ten brands of sink-floor drain, national protected trademark, national high-tech enterprise, top 500 most valuable brands in China, leading brand in China bathroom, leading enterprise in China light industry hardware industry, and a large-scale comprehensive bathroom leading enterprise integrating R&D, production, sales and service.

3. Shane CAE (Guangdong Shane Sanitary Ware Industry Co., Ltd.)

Guangdong Xi 'en Sanitary Ware Industry Co., Ltd. was established in 1989, and now it has a professional production factory covering an area of 120000 square meters, with dozens of dual-mode sanitary ware production lines imported from Europe, making it one of the largest sanitary ware production factories in China.

That's what Bian Xiao introduced to you about the sink faucet. I believe that after reading Bian Xiao's introduction, you have a certain understanding of the faucet on the sink. For convenience, the daily problem of washing vegetables can be solved well at home. You must buy a faucet on the sink for your family. This will not only help those who do it at home, but also make their home more exquisite. If you don't know much about the faucet on the sink, I hope you can read Bian Xiao's introduction carefully. I believe Bian Xiao's introduction can bring you some help.