The binding method of the visual anchor hook is as follows:

1. The front is the FM signal input terminal, one for the slip resistor and the other for the ~2ma analog signal input. Every two groups of terminals are terminals for control signal input, and passive contacts (i.e. dry contacts) are adopted.

2. The principle is to adjust the voltage in series, increase the capacity in parallel, and configure it in combination with the battery system voltage platform. First of all, we have to reach our output voltage of 12v, and the batteries need to be connected in series (four batteries in Ferrous lithium phosphate are connected in series).

3. The front and rear wheels are the same, and there are 16 wheels with the least spokes in the world. The second word should be the eggbeater, with 24 pieces before and after.

4. Take off the sticker (or trademark) paper at the bottom and you will see the screw holes (some screws are under the sticker). Remove the screws with a small plum blossom screwdriver and push the upper cover of the mouse forward to remove the cover. The middle screw may rust badly. Try using a loosening agent.

5. Visible anchor fish chicken feet hook binding method, as above. This is a Luya hook, and the anchor hook is a bare hook, without these bionic baits.

6. Hook ahead and fall behind. Anchor hooks don't need bait. Generally, the bought anchor hooks don't have lead weights. You can add a lead weight by yourself. Generally, it is not easy to fix the garden. It is easier to replace it with nuts. mooring anchor hooks are made with sea poles.

7. The binding method of the anchor hook and the plumb hammer is: generally, the main line and the sub-line are separated, and the length of the sub-line is generally between 4cm and 1m according to the number of hooks and personal preference.