First, don't use inferior plates.
Inferior plates are prone to formaldehyde exceeding the standard. The quality of materials determines the quality of cabinets. In addition to the panel, edge sealing and bonding are also needed to ensure the environmental protection of the cabinet.
Second, pay attention to the thickness of the cabinet plate when customizing the cabinet.
The cost varies greatly with the thickness of the cabinet plate, and the cost of 18 mm thick plate is 7% higher than that of 16 mm thick plate. The service life of cabinets made of 18 mm thick plate can be extended by more than one time, ensuring that the door panels are not deformed and protecting the countertops from cracking.
Third, when customizing cabinets, pay attention to whether they are independent cabinets.
The whole set of cabinets will affect the fastness, so consumers should ask clearly when purchasing the whole cabinet. The service life and stability of the two are 2-3 times different, and the cost is 5% different. Consumers can be identified by the packaged and installed cabinets. If independent cabinets are assembled in a single cabinet, each cabinet should have its own packaging.
Fourth, pay attention to ask about the composition of artificial stone when customizing cabinets.
Suitable materials for kitchen countertops are fire boards, artificial stones, natural marble, granite and stainless steel. Among them, artificial stone countertops have the best cost performance. Cheap table top calcium carbonate is high in composition and easy to crack. At present, composite acrylic and pure acrylic are widely used in the market. Generally speaking, about 20% of acrylic acid in composite acrylic acid is the best proportion.
Five, the hardware quality affects the overall quality.
The hardware on the cupboard is the most important part of the whole kitchen, which directly affects the overall quality of the cupboard. At present, the quality of hardware has become an important yardstick to distinguish cabinets. Consumers can pay attention when customizing cabinets. High-quality brand cabinets will clearly indicate the brand of hardware used, and consumers can choose from many aspects.
Sixth, we should pay attention to the assembly method of cabinets when customizing cabinets.
Generally, small factories or hand-made ones can only be connected by screws, rivets or adhesives. Adopting the latest third-generation box bar and tenon structure, strengthening the fixed parts and quick-loading parts can ensure the firmness and endurance of the box more effectively, use less adhesive and be more environmentally friendly.
Seven, when customizing the cabinet, pay attention to whether the backplane is single-sided or double-sided.
Some manufacturers cut corners and only seal one backboard. The back plate is sealed on one side, which is easy to be damp and moldy, and it is also easy to release formaldehyde, causing pollution. So it must be sealed on both sides.
Eight, gorgeous appearance does not save energy.
The sink directly affects the consumption of tap water. Double water tanks can be used for soaking and washing respectively, and the water consumption is more reasonable. In addition, the setting of the gas stove should try to avoid the tuyere. If it is installed by the door, the gas will be affected by the flowing air when it is used, and it cannot be absorbed centrally, which will affect the work of the range hood.
Nine, pay attention to the installation method of aluminum foil in clean water cabinets.
Once pressed or glued during installation. The sealing performance of one-time pressing is more perfect, moisture is not easy to penetrate, the cabinet body is protected more effectively, and the service life of the cabinet body is prolonged.
X. size
When measuring, it is very important to pay attention to the distance and height of gas meter, pipeline from the wall, the height of water inlet and outlet, the height of flue, the distance of drainage pipe from the wall and the height of socket. And make a complete record. It is recommended to measure twice to avoid the first mistake. When measuring, it depends on whether there are steps on the ground or concave-convex beams on the wall. When making a window hanging cabinet, we should consider whether it is convenient to pull the screen window.
XI。 Cabinet modeling
There are various shapes of cabinets, such as straight, L-shaped and island-shaped. When consumers customize cabinets, they must actually determine the shape and layout of cabinets according to the direction of kitchen space. L-shaped cabinets are widely used now, which is an ideal choice for small spaces. In this way, the ideal working triangle can be obtained by dividing the working area between two connected walls. Stove, sink, disinfection cabinet, refrigerator, there are operating tables between each station to prevent splashing and overcrowding.