The front windshield of a new car has an annual inspection label and can be filmed. However, these signs need to be peeled off before applying the film. After the film is pasted and completely stable, the annual inspection label, insurance label and environmental label will be re-attached.

Car film is to stick a film-like object on the front and rear windshields, side windows and sunroofs of the vehicle, and this film-like object is also called solar film or explosion-proof insulation film. Its main function is to block ultraviolet rays, block part of the heat, prevent injuries caused by sudden bursts of glass, and prevent glare. At the same time, based on the one-way perspective performance of the solar film, it can achieve the purpose of protecting personal privacy. In addition, it can also reduce damage to items and people in the car caused by ultraviolet radiation. Through physical reflection, it can lower the temperature inside the car and reduce the use of car air conditioners, thus reducing fuel consumption and saving some expenses.

You also need to pay attention when applying the film:

1. After the film is applied to the car, avoid raising or lowering the windows within three days;

2. Do not wash the car within three days;

3. Do not open the sunroof when driving a vehicle with a sunroof within three days, especially when driving at high speed;

4. After applying the film in winter, it is recommended that you do not raise or lower the window for a week. Don't wash your car either. It takes about a month for the front and rear blocks to dry out.

5. If you encounter bubbling on the edge of the membrane, you should go to the construction site for repair within 24 hours. If the time is exceeded, the glue around the bubble has dried and the membrane cannot be moved. Creases will occur.

6. It is forbidden to attach strong adhesive labels directly to the film within one month after applying the film to avoid causing part of the film to detach from the glass.

7. When applying for car wraps, you must also understand the vehicle inspection policies of each city. If the visible light perspective ratio of the front windshield and the glass other than the windshield used for the driver's viewing area in some cities does not reach 70%, the annual inspection will not be passed. When applying car film, leave a triangular area on the front window and do not apply film, otherwise it will affect the normal annual vehicle inspection work.