Ribbon is widely used, and the processing equipment of ribbon also requires a high degree of automation and exquisite effect. The traditional ribbon cutting is based on the principle of cold cutting and hot cutting, and the cutting effects are burr, loose edge, uneven incision or yellowing and burning. In order to improve this situation, the ribbon can be cut by ultrasonic principle, which can realize automatic cutting and ultrasonic sealing without yellowing and burning, and achieve ideal results. The main equipment of ribbon cutting are: automatic ribbon cutting machine, automatic ribbon cutting machine and semi-automatic ribbon cutting machine, all of which use ultrasonic principle to cut ribbon.

Ribbon shearing

There are usually two methods to cut the ribbon: one is manual cutting, and the other is machine cutting.

Generally speaking, electric wire cutting or hay cutter cutting is used for manual cutting. These two cutting processes have low equipment investment, but high labor cost. In addition, when cutting with electric heating wire, it will produce a lot of smoke. And the cut surface of the glass ribbon will leave a scorch mark. The hay cutter was cut off, although there was no trace of smoke and burning. However, if the seal can not be effectively sealed, there will be a phenomenon of loosening the mouth (that is, the edge of the beard).

Automatic tape cutter cutting: The tape cutter is divided into hot cutting machine, cold cutting machine and ultrasonic cutting machine. Working principle:

Automatic shearing machine combines ultrasonic welding technology with traditional shearing technology. When the ultrasonic generator is working, the ultrasonic energy is transmitted to the welding head through the ultrasonic transducer, which generates violent vibration and friction with the knife die, thus achieving the shearing effect and making the sheared product more beautiful, firm and efficient.

Technical parameters:

Model: NK-CJQ 1526A power supply: AC220V-240V/ 50-60Hz.

Power: 1500W

Frequency: 20KHZ

Pressure: 0.6-0.8 MPa

Type: ultrasonic shearing

Weight: 125kg

Size:1200mm× 550mm×1350mm (length× width× height)

Features:

1. Adopt ultrasonic cutting, the incision is complete and beautiful, the trimming is neat and smooth, there is no burr or loose edge, and the cutting effect is excellent; 2. This machine adopts PLC console, and the computer automatically feeds and counts, which has high precision, high speed, simple and quick length adjustment and high efficiency, and can cut multiple pieces at the same time;

3. It is mostly used for cutting straight knives, oblique knives, swallowtails and other shapes such as gift belts, strip nylon belts and strip ribbons;

Description: This equipment is widely used in packaging, gifts, ribbon cutting and other industries, and its unparalleled cutting effect is deeply loved by our customers.

Working environment:

1. The power supply must be AC220-240V and safely grounded;

2. Place the machine in a dry, ventilated and well-lit place;

3. There are no corrosive products where the machine is placed. Working principle:

Automatic punching shear is based on the principle that ultrasonic vibration and friction energy can instantly generate heat energy, and the die or tool contacts the ultrasonic vibration surface under the pressure of the cylinder, so as to achieve the effect of cutting, welding or punching. Automatic sealing of cutting or punching edges, no blackening, scorching, hardening and loosening, comfortable feel and excellent sealing effect.

Machine parameters:

TypeNo.: NK-CK2022 Voltage: 220v V.

Air pressure: 4-6 kg/cm2

Frequency: 20KHZ

Working rate: 2000W

Effective rate: 20-80 times/minute.

Inches: 1300 * 750 * 1400 mm.

Gross weight: 125KG

Function introduction:

1. Ultrasonic cutting or drilling has excellent effect (tangent, oblique cutting, trapezoid, irregular, round hole, square hole, irregular hole, etc.). );

2. Multi-station alternate work, which can be dedicated to complex products;

3. Digital display and numerical control of productivity are convenient, quick and more humanized;

4.PLC program control, simple operation, easy to understand and learn;

5. After discharging, the whole machine is automatic, and one person can operate 2~3 machines, which greatly saves labor. Scope of application:

Ribbon, ribbon, synthetic fiber cloth, chemical fiber blended material, hook and loop (hook and loop belt) and other strip coils containing more than 30% chemical fiber components. Machine parameters:

Product name: semi-automatic belt cutter

Model: NK-WXH2009A Frequency: 20KHZ

Voltage: 220 volts

Output power:1500 w w.

Appearance size: 1200*550* 1500MM.

Weight: 55 kg

Effective rate: 30-50 times/minute.

Product features:

1. Ultrasonic cutting, complete and beautiful incision, neat and smooth trimming, no burr, no loose edge and excellent cutting effect.

2. This machine adopts air cylinder to control pressure, foot switch, manual feeding, table with scale, and the length can be adjusted at will.

3. It is suitable for cutting elastic rope and ribbon, and can be cut straight, diagonally and dovetail.

Introduction: This equipment is widely used in ribbon, packaging, gifts, clothing, ribbon cutting and other industries, and is favored by our customers for its beautiful cutting effect.