Operating environment: OPPOReno6, coloros 12 system, etc.

1. First take out the Bluetooth headset, open the upper cover, and press and hold the button of the headset box for three seconds. The status is red and white lights flashing rapidly and continuously.

2. Then enter the Bluetooth pairing page of the mobile phone and find "EDIFIERLolliPod sL" and "EDIFIERLolliPod sR".

3. Select the connecting device as required. If it is the left ear, it is "Edifier Loll iPod SL"; Otherwise, it is the right ear earphone. Just select "Pairing".

4. The final pairing is successful, and the corresponding power will also be displayed.

The use of rambler Bluetooth headset is as follows:

1. Charging: Please make sure the earphone is fully charged before use. The charging time is about 2 hours. If the earphone is not charged for a long time, the battery life will be greatly shortened. It is recommended to charge the headphones at least once every three months. When charging, the red light means charging, and when charging is completed, the red light goes out and the blue light is bright.

2. Power on/off: Press the multifunction key for about 2 seconds when starting the machine, release the key when the blue light is on, and a prompt tone can be heard in the earphone. Press and hold the multi-function key for about 5 seconds when turning off the power supply, and release the key when the red light is on, and a prompt tone can be heard in the earphone.

3. Pairing: Put the earphone close to the mobile phone, press and hold the multifunction key for about 5 seconds, and release it when the red and blue lights flash alternately. The headset is now in pairing mode. Make sure that the headset is effectively connected to the mobile phone, that the headset is not too far away from the mobile phone, and that there are no interference devices nearby. The effective working range of headphones is 10m.